60mm bore hole grommet describes this Schwinn Hardware part 59167, a medium zamak cable grommet with rubber designed to finish a 60mm hole and manage passing cables through work surfaces. The satin nickel finish visually dresses a raw 60mm bore, so the opening looks finished on desks, cabinets, or workspace panels. The 2-11/16 inch diameter body covers the hole edge around the bore, hiding rough cuts at the perimeter. The zamak construction forms a solid, dimensionally stable ring, so the grommet seats securely in the machined 60mm opening. The medium size classification positions it between small and large pass-throughs, useful where a moderate cable bundle is needed. As a Schwinn Hardware grommet within multimedia and workspace components, it serves as a defined pass-through point in organized installations.
The defined 60mm bore hole dimension in the SAP description sets a clear drilling requirement, so installers can match the cutout directly to this grommet. The grommet is identified as medium zamak, so the rigid metal body can seat positively in the machined 60mm opening without deforming as it is pressed into place. The 2-11/16 inch diameter from the product name indicates the outer size, so the flange overlaps the rim with enough coverage to mask the cut edge. Because the product is categorized under multimedia and workspace components, it is suited to pass cables through worktops, cabinetry panels, or similar surfaces where a defined wiring route is needed. The satin nickel surface then remains visible on the face side, tying the functional opening into surrounding hardware.
The web description calls this part a medium zamak cable grommet with rubber, star-cut cable grip for a 60mm hole, aligning it with typical desk, cabinet, or panel bores designed around that diameter. Being classified under shelf, closet and garage organization and multimedia and workspace components places it in environments where cables need guided passage through constructed surfaces. The satin nickel 2-11/16 inch diameter flange presents a finished collar on the visible face of the panel, so the grommet suits office furniture, built-in workstations, and similar installations. The 60mm bore reference in both the SAP description and the web description gives a consistent cutout dimension, so any surface drilled to that size can accept this grommet in comparable fashion across multiple stations.
The star-cut cable grip described in the web description introduces flexible openings in the rubber section, so single cords or small bundles can pass through while the grip gathers around them to reduce open gaps. This arrangement helps direct cables through the 60mm hole instead of wandering along the panel edge, giving a tidier cable path on repeated installations. The combination of a zamak body and rubber grip means the rigid outer ring defines the 60mm interface while the inner material can conform around different cable diameters, supporting varied low-voltage or data leads within the same bore size. As the product is part of Schwinn Hardware grommets, the consistent manufacturer part 59167 becomes a repeatable choice whenever a satin nickel, 60mm bore cable path is specified in a project standard.
This medium zamak cable grommet with rubber is specified for a 60mm bore hole, so any work surface drilled to 60mm is prepared to accept the part.
The product name states a 2-11/16 inch diameter, so the visible flange overlaps the 60mm cutout and covers the bore edge on the finished surface.
The web description notes a rubber, star-cut cable grip, meaning cables pass through the slotted center while the rubber closes around them to neaten the opening.
The web description identifies it as a medium zamak cable grommet, so the outer ring is formed from zamak to create a rigid, stable collar in the 60mm bore.
The SAP description calls it a satin nickel finish, so the exposed flange presents a muted metallic look on desks, cabinets, or workspace panels.
The web description notes it is available in 3 finishes, so projects can match the 60mm cable pass-through to surrounding hardware color schemes.
The combination of a 60mm bore size, 2-11/16 inch diameter flange, and satin nickel finish positions this Schwinn Hardware 59167 grommet as a precise choice for cable pass-throughs. The zamak construction with rubber, star-cut cable grip lets cables route through a defined opening while the visible collar refines the look of the bore. For desks, cabinetry, or workspace surfaces designed around 60mm openings, this medium zamak cable grommet with rubber gives a consistent, repeatable way to organize and finish cable passage points.