Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Right angle shelf rest describes this Selby Furniture Hardware X72N support as a 1/4 inch pin, right angle shelf rest with nickel finish, so it fits standard 1/4 inch drilled holes while presenting a flat bearing surface for the shelf. The .060 steel construction forms a rigid pin and rest, which holds its shape under normal cabinet or closet loads and keeps the shelf edge aligned against the angle. The 1/2 inch wide rest gives the shelf a defined seat, so the load is carried on metal rather than on the cabinet side material. The 13/16 inch long rest projects under the shelf depthwise, which spreads load further into the shelf panel and reduces point stress at the pin. The nickel finish coats the steel, which provides a clean, neutral metallic look that blends with typical cabinet hardware. Sold in full box quantities only describes the supply format for larger jobs.
The 1/4 inch pin diameter on the Selby Furniture Hardware X72N shelf support is sized for 1/4 inch holes, so it matches standard cabinet line-bore and shelf-pin drilling patterns and creates a snug locating fit. The right angle shelf rest geometry means the pin engages the side panel while the horizontal leg extends under the shelf, so the support sets itself by the drilled hole location without additional layout. The rest width of 1/2 inch and length of 13/16 inch provide a known bearing zone, so hole positions along the case side dictate shelf height while the shelf edge aligns along the angle. The nickel finish remains on the exposed leg of the support, so the visible metal around the shelf line presents a consistent color in open cabinets.
The Selby Furniture Hardware X72N is identified as a shelf support in the Shelf, Closet & Garage Organization category, so it serves in shelving applications within cabinetry, closets, and similar storage work. Its 1/4 inch pin format aligns with case construction that uses 1/4 inch shelf pin holes in side panels, so it suits layouts drilled with this standard size across banks of holes. The rest dimensions of 1/2 inch width and 13/16 inch length suit typical cabinet shelf thicknesses, so the support tucks beneath the shelf without projecting excessively into the opening. The .060 steel body gives the support a solid metal profile, so it is appropriate where metal shelf supports are preferred over non-metal options in shop-built or modular installations.
The defined 1/4 inch pin diameter directly affects drilling strategy, because line-bored panels using 1/4 inch bits will accept this support without changing tooling or adjusting hole spacing. The right angle shape establishes two reference faces - one horizontal for load and one vertical for location - so installers can rely on consistent shelf position across multiple supports as long as hole spacing is consistent. The 1/2 inch wide rest concentrates support near the cabinet side, which keeps the load path close to the side panel where structural strength is typically higher. The 13/16 inch length of the rest extends under the shelf enough to engage more of the panel depth, which can help reduce shelf edge deflection at the pin line. The .060 steel construction means the support is formed from metal of known thickness, so its profile can be anticipated when designing clearances near doors, face frames, or adjacent components. The nickel finish delivers a neutral metallic tone, so designers and installers can plan exposed interiors knowing the supports will visually coordinate with other nickel finish hardware in the project.
The Selby X72N shelf support uses a 1/4 inch pin diameter, which fits shelving and cabinet side panels drilled with 1/4 inch shelf pin holes in standard line-bore layouts.
The right angle design forms a horizontal rest and vertical register, so the shelf sits flat on the metal ledge while its edge locates against the angle for consistent positioning.
The shelf rest measures 1/2 inch wide by 13/16 inch long, so it provides a defined bearing area under the shelf edge to spread load along the metal support.
The Selby X72N shelf support is constructed of .060 steel, which gives the pin and rest a solid metal structure for typical cabinet and closet shelving applications.
The Selby Furniture Hardware X72N has a nickel finish, so the visible portion of the support presents a uniform metallic appearance inside cabinets and shelving units.
The X72N shelf support is sold in full box quantities only, which suits production or multi-cabinet projects that use numerous matching shelf supports.
The Selby Furniture Hardware X72N right angle shelf rest combines a 1/4 inch pin with a 1/2 inch by 13/16 inch rest, so it aligns with standard 1/4 inch drilled patterns while giving each shelf a defined metal bearing surface. Its .060 steel construction and nickel finish provide a sturdy, metallic support that visually coordinates with other nickel tone hardware in cabinet or closet interiors. Sold in full box quantities only through Wurth Baer Supply, it suits shop and field work where multiple matching shelf supports are needed across a project.
Sold In: 2500 Each