Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Maxcess Elite Plus 2D right locking device connects the drawer front to the 75X3 slide, creating a secure link between box and runner so the drawer tracks with the slide instead of floating under load or during use. This Grass America drawer locking device is designed for the front of the drawer, so the installer ties the critical reference point directly into the slide hardware and keeps motion consistent from fully closed to fully extended. The part is described as a universal locking device, so a single right-hand unit serves multiple Maxcess or Elite Plus 75X3 drawer configurations where that interface is used, which helps standardize hardware across a shop or project line. The SAP description calls it a right 75X3 front locking device, so it is specifically oriented for the right side of the drawer system and aligns with the matching left-hand component in a typical install.
The 2-D front 75X3 locking device with height adjustment plus 2.5mm (3/32") gives installers vertical tuning directly at the drawer-to-slide connection, so front faces can be lifted slightly to clear reveals or align to an adjacent run. Side adjustment of plus or minus 1.5mm (1/16") lets the same hardware shift the drawer front laterally, so minor cabinet or box variances can be corrected at the hardware rather than rebuilding parts. Because the front locking device securely connects the drawer to the slide, every height or side adjustment is carried through the full stroke of the runner, so the front stays aligned when the drawer is opened and closed.
The SAP description identifies this part as a right 75X3 front locking device, so it is intended for the right-hand side of a 75X3-based drawer system using compatible Maxcess or Elite Plus hardware. The front locking device securely connects the drawer to the slide in that position, turning the right front corner into a repeatable reference that follows the runner track. Because it is described as a universal locking device and non flanged, it suits right-hand drawer applications using that 75X3 interface where a compact, flange-free connection is preferred. In practice, this means the right side of the drawer front ties into the Grass America slide assembly at the designated point, giving that side the same controlled motion as the runner itself.
The 2-D front 75X3 locking device with height adjustment plus 2.5mm (3/32") helps installers correct small layout differences after the drawer is hung, because the front can be raised within that range without altering the cabinet or slide position. Side adjustment of plus or minus 1.5mm (1/16") at the same device lets the drawer front shift left or right relative to the slide, which is useful when face gaps differ by a millimeter or two across a bank of drawers. Since the front locking device securely connects the drawer to the slide, these adjustments are locked into the movement of the runner so the set gaps stay consistent from closed to open. The non flanged design keeps the adjustment area compact at the front connection, leaving the drawer edge profile defined more by the box construction than by the outline of the hardware body.
The Maxcess/Elite Plus 2D right locking device securely connects the front of the drawer to the 75X3 slide, so the drawer box is positively guided by the Grass America runner system.
The 2-D front 75X3 locking device provides plus 2.5mm (3/32") height adjustment, allowing the installer to lift the drawer front slightly to align reveals with neighboring fronts or frames.
The side adjustment of plus or minus 1.5mm (1/16") lets the drawer front shift left or right on the slide, helping fine-tune gaps between adjacent drawers for a consistent layout.
This locking device is described as non flanged, so its body stays more compact around the front connection point, which can suit drawer designs that favor minimal visible hardware outlines.
The description right 75X3 front locking device indicates this part is oriented for the right-hand side and interfaces with 75X3 slide systems at the drawer front connection.
The front locking device securely connects the drawer to the slide so the box tracks with the Grass America runner, supporting predictable motion and alignment across the drawer stroke.
The 80052S-12 right 75X3 front locking device from Grass America combines a secure drawer-to-slide connection with 2D adjustment in height and side offset, giving installers a way to tune reveals using the same part that drives the drawer motion. For projects built around Maxcess or Elite Plus 75X3 hardware where a non flanged, right-hand universal locking device is specified, this component provides the defined adjustment ranges needed to align drawer fronts across a run. Use this part number when that combination of secure front connection and on-hardware adjustment is required.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  GF80054-12 Mfr# 80054S-12 | Maxcess/Elite Plus 2D Right Universal Locking Device with Flange |