Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Maxcess Elite Plus 2D left locking device is a Grass America front locking device that securely connects the drawer to the slide, giving a firm mechanical link between the drawer box and the Maxcess or Elite Plus runner. The product is identified as a left universal locking device without a flange, so it fits the designated left runner position where a non-flanged body is required at the front. The front locking device design fixes the drawer to the slide at the front, which helps stabilize the box as it opens and closes under normal shop-built drawer loads. The 2-D front 75X3 locking device format means the part is matched to 75X3 runners, which keeps the interface consistent when replacing or building out that specific system on multiple cabinets. This locking device provides the primary front connection for the drawer, which matters when repeatable alignment from job to job is needed.
This left 75X3 front locking device is a Grass America component that connects at the front of the drawer and corresponding 75X3 slide, so it acts as the primary interface between box and runner on the left side. The 2-D design provides height adjustment of plus 2.5mm, giving room to bring a slightly low drawer front into line with neighboring fronts without remaking the drawer. Side adjustment of plus or minus 1.5mm lets the installer move the drawer front laterally, which is useful when the cabinet carcass or face frame introduces minor variations across openings. The non-flanged body means the connection area at the front of the slide remains compact, which is helpful where interior clearances or design lines call for a flush front connection.
The Maxcess/Elite Plus 2D left universal locking device functions as the left-side front connector in a Grass America drawer system, so it is used wherever a 75X3 runner is specified and a secure front lock is required. The part number 80051S-12 identifies this device as a specific Grass front locking device, which matters when matching components on repeat jobs or when replacing a worn or damaged left-side connector. Because the front locking device securely connects the drawer to the slide, it supports smooth movement by tying the drawer box directly to the runner profile on the left side. That front connection holds the drawer square to the slide, which helps keep the box from racking under typical side loads during everyday use. The non-flanged left design keeps the front connection more compact against the runner, which can be important when working inside tight cabinet clearances or against interior features near the slide front.
The 2-D front 75X3 locking device provides height adjustment of plus 2.5mm, or about 3/32 inch, which translates into the ability to raise the drawer front slightly after installation rather than altering the cabinet or re-drilling. That vertical range lets the installer compensate for small layout variations, so the top and bottom gaps between drawer fronts can be tuned for a straight, continuous line. The device also offers side adjustment of plus or minus 1.5mm, or about 1/16 inch, giving room to move the drawer front left or right at the connection point to the runner. This side-to-side movement helps align the reveals between neighboring drawer fronts across a bank, even when carcass edges vary slightly. Because both adjustments are built into the same left front locking device, the fine-tuning process is concentrated at the runner interface, which can shorten alignment time across multiple drawers using the same 75X3 system.
The Maxcess/Elite Plus 2D left universal locking device securely connects the drawer to the slide at the front, so the drawer box is firmly tied to the 75X3 runner on the left side.
The left 75X3 front locking device mounts at the front of the drawer on the left side, acting as the primary connection point between the drawer box and the corresponding 75X3 slide.
The 2-D front 75X3 locking device provides height adjustment of plus 2.5mm, approximately 3/32 inch, allowing vertical fine-tuning of the drawer front position relative to adjacent fronts.
The front locking device offers side adjustment of plus or minus 1.5mm, about 1/16 inch, so the drawer front can be shifted left or right to align reveals across a cabinet bank.
Non flanged on this left universal locking device indicates the body has no projecting flange at the connection, keeping the front interface compact where a flush-style runner connection is required.
The manufacturer part number for this Grass America left 75X3 front locking device is 80051S-12, which helps match it to the correct Maxcess or Elite Plus 2D slide system.
This Grass America Maxcess/Elite Plus 2D left universal locking device, with its 75X3 front format, non-flanged body, and built-in 2-D adjustment, is suited to drawer projects built around that specific runner system. The secure front connection between drawer and slide, combined with height adjustment of plus 2.5mm and side adjustment of plus or minus 1.5mm, gives installers room to tune reveals without reworking the cabinet. For shops standardizing on Grass Maxcess or Elite Plus hardware, choosing this 80051S-12 left locking device for the left side keeps parts consistent across installations and simplifies future replacements.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  GF80053-12 Mfr# 80053S-12 | Maxcess/Elite Plus 2D Left Universal Locking Device with Flange |