Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Maxcess Elite Plus 2D left locking device securely connects the drawer to the slide at the front, creating a positive connection that keeps the drawer engaged during operation. This Grass America component is a left-side front locking device, so it acts on the left slide member to hold the drawer in place. Being a 2D front 75X3 locking device, it is designed to provide two-way adjustment at the front of the drawer, which helps fine-tune the drawer position relative to the cabinet face and surrounding fronts. The locking function at the front of the slide lets you release or engage the drawer at that point, supporting normal slide removal and reinstall steps on drawer systems that use this style of connector.
The front locking device securely connects the drawer to the slide at the front, so the connection point becomes the primary reference for both locking and adjustment. With height adjustment of plus 2.5mm, or 3/32 inch, the installer can raise the drawer front slightly from its base position to align it with nearby fronts. Side adjustment of plus or minus 1.5mm, or 1/16 inch, allows shifting the drawer front left or right within that range, which helps correct visible gap variations after the slides are mounted. The flanged front layout gives a defined interface on the locking device that aligns with the drawer front area, supporting repeatable placement that matches the geometry of the 75X3 front zone.
The front locking device is described as a left 75X3 flanged front locking device, so it is placed on the left side at the front area in drawer systems using this 75X3 front geometry. As a front locking device, its role is to connect the drawer to the slide specifically at the front contact point, which means the front of the drawer is controlled by this component during slide engagement. The Grass America branding and Maxcess/Elite Plus 2D name identify it as part of a coordinated drawer slide system, so it works as a dedicated component within that family rather than a generic latch. By being assigned as the left version, it complements a corresponding right device in a typical pair, with each side supporting the drawer on its respective slide member during operation.
The designation as a 2D front 75X3 locking device indicates that this part provides two-dimensional adjustment at the front: vertical and lateral. The height adjustment of plus 2.5mm, or 3/32 inch, lets the installer move the drawer front upward from its nominal position, which is useful when the drawer initially sits slightly low relative to the surrounding layout. The side adjustment of plus or minus 1.5mm, or 1/16 inch, allows shifting the drawer front both left and right from center, which helps balance reveal gaps on each side of the drawer front. Because both adjustments work through the same front locking device that securely connects the drawer to the slide, each small turn or movement directly affects the visible alignment, simplifying fine-tuning. The flanged front construction on this Grass America component helps establish a stable reference as those adjustments are made, contributing to repeatable drawer positioning from cabinet to cabinet.
The front locking device securely connects the drawer to the slide, so it holds the drawer on the slide member during movement and provides the adjustment point at the front interface.
The product is described as a left 75X3 flanged front locking device, so it is intended for use on the left side position in the applicable drawer slide system.
The term 2D front 75X3 locking device indicates a front-mounted part providing two-directional adjustment at the 75X3 front zone, helping to correct both height and side drawer alignment.
The locking device offers height adjustment of plus 2.5mm, or 3/32 inch, which lets the installer raise the drawer front slightly to line it up with adjacent drawer fronts or reference edges.
The front locking device has side adjustment of plus or minus 1.5mm, or 1/16 inch, so the drawer front can be shifted left or right within that range to balance visible gaps.
The flanged front on the locking device provides an extended mounting surface at the front area, giving a defined interface that supports consistent positioning relative to the drawer front.
This left 75X3 flanged front locking device from Grass America is built to securely connect the drawer to the slide while offering controlled adjustments at the front. With height adjustment of plus 2.5mm and side adjustment of plus or minus 1.5mm, it supports dialing in drawer front alignment where a 2D front 75X3 layout is used. For drawer slide systems using the Maxcess/Elite Plus 2D left locking format, this 80053S-12 part provides the front connection and adjustability needed to achieve consistent drawer operation and visually even reveals.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  GF80051-12 Mfr# 80051S-12 | Maxcess/Elite Plus 2D Left Universal Locking Devices, No Flange |