Salice 200 Series Soft-Close Silentia Full Overlay Face-Frame;Frameless Thick Door Hinge Nickel, 155° Dowel - C2RKAE9

Salice Series 200 155 Degree Thick Door Hinge

Salice Series 200 155 degree thick door hinge with Silentia+ is a concealed cabinet hinge that integrates the soft-close mechanism directly in the hinge cup, so the hinge delivers controlled closing without adding separate dampers. This thick door hinge is suitable for doors up to 1-1/4 inch thick, so it lets you use heavier or thicker door constructions while maintaining the concealed European hinge look. The hinge opens to 155 degrees, which gives wide access into the cabinet and helps with interior hardware clearance. Its Silentia+ system uses twin silicone-oil dampers, so the soft-close action stays controlled and consistent under normal cabinet use. The soft-close function remains completely hidden inside the hinge cup, so nothing interrupts the clean interior appearance of the cabinet. As a concealed cabinet hinge, it belongs to the Salice 200 Series, so it is designed to work with Salice mounting plates.

Key Thick Door Hinge Details For Cabinet Work

• Silentia+ provides an adjustable integrated soft-close mechanism operated by twin silicone-oil dampers, so you can tune door closing and maintain a controlled, quiet action over time.
• The hinge is suitable for doors up to 1-1/4 inch thick, so you can specify thick or profiled doors and still keep minimal gaps and a consistent reveal line.
• Large overlays up to 24 mm are possible, so this hinge supports full overlay layouts and tight spacing between adjacent doors in face-frame or frameless runs.
• The all steel hinge is nickel plated for corrosion resistance, so the hinge tolerates typical kitchen and bath environments while maintaining a clean appearance.
• The hinge is permanently self lubricating with environmentally safe lubricants, so the moving parts continue to operate smoothly without separate lubrication steps in normal service.

Hinge Mounting And Adjustment For Accurate Fit

This Salice Silentia Series 200 hinge uses a cup depth of 15.5 mm, so the cup machining in the door must match that depth for proper seating and support. The hinge cup edge drilling distance ranges from 3 mm to 9 mm, so you can position the cup closer or farther from the door edge to suit overlay and reveal requirements. A patented parallel side-to-side adjustment of plus 4.5 mm to minus 1.5 mm is built into the hinge arm screw, so once the cups and mounting plates are fixed, the hinge lets you shift the door sideways while keeping it parallel to the cabinet, which is useful for aligning gaps across multiple doors. This hinge is designed to work with Salice mounting plates, so the hinge interface and adjustment scheme match that plate system.

Using This Soft Close Hinge In Cabinet Projects

Where This Salice Thick Door Hinge Performs Best

This Salice America 200 Series soft-close Silentia full overlay face-frame and frameless thick door hinge is intended for concealed cabinet hinge applications where doors up to 1-1/4 inch thick are required. Because it is a European concealed long arm hinge in the thick door hinge category, it suits cabinets that need wide opening angles and minimal gaps between doors. A 155 degree opening angle lets the door swing well past standard openings, which helps when drawers, pull-outs, or interior fittings sit behind the door line. Large overlays up to 24 mm mean the hinge can support full overlay face-frame cabinets as well as overlay doors on frameless cases, keeping front alignment consistent across a run. As a concealed cabinet hinge, it keeps hardware out of sight when the door is closed, which supports clean, uninterrupted cabinet faces in kitchens, baths, and built-ins.

Why Silentia Soft Close Details Support Consistent Results

The Silentia+ system in this Series 200 hinge uses an adjustable integrated soft-close mechanism with twin silicone-oil dampers, so the damping is controlled within the hinge body and not subject to external bumpers that can shift. With the soft-close mechanism fully hidden inside the hinge cup, the cabinet interior stays clear of separate soft-close devices, which simplifies layout around shelves or interior fittings. The patented parallel side-to-side adjustment of plus 4.5 mm to minus 1.5 mm through the hinge arm screw lets you fine-tune door position after mounting, so multiple doors can be brought into line without remachining cup holes. The hinge cup depth of 15.5 mm and hinge cup edge drilling distance of 3 mm to 9 mm define the door machining pattern, so once that pattern is set up, repetitive drilling gives consistent hinge placement from door to door. An all steel, nickel plated, permanently self lubricating hinge body means the mechanical action remains smooth under typical cabinet use while resisting corrosion, so hinge function stays consistent over the life of the installation.

Common Questions About This Salice 200 Series Hinge

Selecting This Hinge For Thick Overlay Doors

This Salice Silentia 200 Series soft-close concealed cabinet hinge combines 155 degree opening, support for doors up to 1-1/4 inch thick, and overlays up to 24 mm, so it suits full overlay face-frame and frameless cabinet layouts. With its integrated Silentia+ soft-close mechanism and patented parallel side-to-side adjustment of plus 4.5 mm to minus 1.5 mm through the hinge arm screw, it helps bring thick doors into clean alignment while controlling closing speed. The all steel, nickel plated, permanently self lubricating construction supports long-term hinge performance in typical cabinet environments, so this hinge can be specified where a concealed, soft-close thick door solution is required.