Company Information
Services
Approved US Government VendorCage Code: 1UXJ6
Copyright © 2004-2026, Würth Baer Supply Company. All Rights Reserved.
Copyright © 2004-2026, Würth Baer Supply Company. All Rights Reserved.
Freud LU91R010 saw blade is a 10 inch diameter, 60 tooth ATB general purpose circular saw blade designed for sliding compound miter saws. The 10 inch diameter matches common miter saw setups, so the blade works in typical shop and jobsite tools. A 5/8 inch arbor connection lets the blade seat on standard miter saw arbors for secure running. The blade uses a thin kerf design that removes less material than standard carbide blades, which reduces the power needed for cutting. This thin kerf design helps saws with lower horsepower maintain cut quality. A 5 degree negative hook angle helps prevent the blade from being too aggressive, so the work piece is pushed down and toward the fence during the cut. This negative hook behavior supports better control while positioning material on the saw.
This thin kerf industrial blade is built for sliding compound miter saws, so its geometry aligns with the sliding action of those tools. The 5/8 inch arbor size provides a direct fit on miter saws using that arbor dimension, allowing secure mounting. The 10 inch diameter maintains the expected cutting radius on saws built around that blade size. The 5 degree negative hook angle is suited to miter saw operation, where controlled entry into the work piece reduces climbing as the blade contacts the material. This hook angle helps keep the work piece pressed down to the table and toward the fence, which is useful when cutting longer or taller stock. The thin kerf configuration supports operation on saws with limited horsepower, keeping the load on the motor manageable.
This thin kerf industrial blade is intended for use on sliding compound miter saws, aligning with its description as a sliding compound miter saw blade. The blade is categorized under miter saw blades and circular saw blades, so its role is focused on miter saw cutting tasks. The 10 inch diameter works with miter saws designed around that blade size to maintain expected cut capacity. A 5/8 inch arbor allows the blade to be installed on saws that use this common arbor dimension, supporting straightforward changeover. The 60 tooth ATB general purpose configuration is described as providing a superior finish cut, which relates directly to crosscutting and mitering where surface quality is important. The combination of thin kerf and general purpose design suits a range of finish-oriented cutting operations.
The 5 degree negative hook angle is described as helping prevent the blade from being too aggressive and pushing the work piece down and toward the fence, which supports consistent control on repeated cuts. This push toward the fence helps maintain alignment during sliding passes. The thin kerf layout removes less material than standard carbide blades, so less horsepower is required to achieve equally good results, which helps saws maintain speed and finish on longer runs. Thin kerf geometry is also noted as allowing a faster feed rate, which can improve throughput on production-style cutting. The Premium Ti br Co HI-Density Carbide Crosscutting Blend is identified as being for maximum performance, so the carbide formulation is tuned for crosscutting applications. The Perma-Shield Non-Stick Coating reduces blade drag and protects the blade from corrosion and pitch build-up, which helps keep the blade running freely and supports consistent cutting over time.
The LU91R010 blade is described as a 10 inch sliding compound miter saw blade, so it is intended for use on sliding compound miter saws built for that blade size and arbor specification.
The 5 degree negative hook angle helps prevent the blade from being too aggressive and pushes the work piece down and toward the fence, which supports controlled and stable cuts on a miter saw.
The thin kerf design removes less material than standard carbide blades, requiring less horsepower and allowing a faster feed rate while still targeting equally good cutting results.
The Premium Ti br Co HI-Density Carbide Crosscutting Blend is identified as being for maximum performance, so its carbide formulation is tuned for demanding crosscutting applications.
The Perma-Shield Non-Stick Coating reduces blade drag and protects the blade from corrosion and pitch build-up, supporting smoother cutting and helping maintain performance over time.
The LU91R010 blade has a 10 inch diameter, a 5/8 inch arbor, and 60 ATB teeth, defining its fit on miter saws and its general purpose finish cutting role.
The Freud LU91R010 saw blade combines a 10 inch diameter, 5/8 inch arbor, and 60 tooth ATB layout for general purpose finish cutting on sliding compound miter saws. Its thin kerf design reduces the material removed per cut, which lessens horsepower demand and supports faster feed rates. The 5 degree negative hook angle helps control the cut by pushing the work piece down and towards the fence. Premium Ti br Co HI-Density Carbide and Perma-Shield Non-Stick Coating support performance by managing wear, drag, corrosion, and pitch build-up. These characteristics position this blade for controlled, finish-oriented work on sliding compound miter saws.
Sold In: 1 Each