Amerock Separa 10-1/16 In Pull For Cabinets

Amerock Separa 10-1/16 in pull is an aluminum cabinet handle in the Silver Champagne finish that provides a consistent modern look across doors and drawers. The center-to-center size of 10-1/16 in (256 mm) sets the hole spacing, which matters when laying out drilling patterns or swapping onto existing cabinetry. The overall length of 12-5/8 in gives plenty of hand clearance across wider drawer fronts, which helps when operating larger or heavier drawers. A projection of 1-3/16 in sets the stand-off from the cabinet face, providing finger room while keeping the pull close enough to avoid catching on clothing. The 1/2 in width keeps the profile slim, which suits clean-lined installs where hardware should sit visually light on the facade. The Amerock Corporation brand and BP36737SC part number give a precise reference for repeat orders on multi-unit or phased projects.

Key Separa Pull Details For Project Planning

• The aluminum material keeps the Amerock Separa cabinet pull lightweight, which helps reduce door and drawer load while still providing a solid gripping surface across frequent use.
• The Silver Champagne finish gives a consistent metallic tone, which helps coordinate hardware across a run of cabinets where a unified appearance is important.
• The 10-1/16 in (256 mm) center-to-center dimension establishes exact hole spacing, which supports accurate drilling, jig setup, and straightforward retrofits to the same size pattern.
• The overall length of 12-5/8 in extends beyond the mounting points, which offers a generous hand span for opening wider cabinet doors or larger drawers.
• The 1-3/16 in projection defines how far the pull stands off the face, which affects finger clearance and how close fronts can sit to adjacent surfaces.
• The 1/2 in width provides a slim face dimension, which suits applications where a narrow, streamlined handle is preferred visually on cabinet fronts.
• The Amerock BP36737SC manufacturer part number uniquely identifies this specific pull, which simplifies specifying, ordering, and matching during future expansions.
• The Separa collection identity ties this pull to a defined design family, which matters when coordinating multiple handle sizes within the same project.

Installation Fit For 10-1/16 In Center Spacing

The 10-1/16 in (256 mm) center-to-center measurement on this Amerock Separa aluminum handle is the primary installation reference, because it sets where the mounting holes must be drilled on doors and drawers. This consistent spacing supports the use of drilling jigs or templates tuned to 256 mm, which helps keep rows of pulls aligned along long cabinet runs. The 1-3/16 in projection defines how far the pull sits off the face, which matters when positioning fronts near walls, appliances, or adjacent cabinets. The 12-5/8 in overall length affects placement on narrower fronts, guiding installers to check that there is enough door or drawer width for the handle to sit fully on the panel. The 1/2 in width keeps the footprint compact, which helps when working near panel edges or narrow rails.

Using The Amerock Separa Pull In Cabinet Runs

Where This Silver Champagne Pull Is Typically Used

The Amerock Separa cabinet pull in the Silver Champagne finish is suited to cabinet doors and drawers where a 10-1/16 in (256 mm) center-to-center pattern is desired. The aluminum construction pairs well with cabinetry in kitchens, baths, or shop spaces that benefit from a metal handle that does not add significant weight to the fronts. The 12-5/8 in overall length allows this pull to sit comfortably across medium to wide drawers, which helps distribute hand force when opening loaded storage. A projection of 1-3/16 in sets a practical stand-off that supports a comfortable grip, especially when fingers approach from above on upper cabinets or from below on base cabinets. The slim 1/2 in width works visually on flat-panel doors or drawers, where a narrow bar-style handle keeps the hardware from overpowering the face design. The BP36737SC identifier from Amerock Corporation anchors this pull within the Separa collection, which supports consistent styling when the same pull is repeated across multiple cabinet banks.

Why These Dimensions Support Repeatable Layouts

The Separa 256 mm center to center pull uses its 10-1/16 in hole spacing as a repeatable reference for layout, which helps installers keep hardware lines straight from cabinet to cabinet. Being able to work from a known 256 mm spacing simplifies jig use, because one setup can be applied across a room of doors and drawers. The 12-5/8 in overall length provides a fixed outside measurement, which is useful when aligning handles relative to panel edges or neighboring pulls for balanced sightlines. The 1-3/16 in projection keeps the handle sufficiently proud of the surface, which helps hands clear decorative edge profiles or door reveals without interference. The 1/2 in width limits how much face area the pull covers, which can matter when maintaining visible grain patterns or design details on the cabinet fronts. The aluminum material interacts predictably with standard cabinet construction, providing a consistent feel across multiple touchpoints in high-use areas. The Silver Champagne finish offers a uniform color target, which is valuable when specifying matching pulls across a phased installation schedule.

Common Questions About Amerock BP36737SC Pull

Selecting This Separa Pull For Your Cabinets

The Amerock Separa 10-1/16 in pull combines a 256 mm center-to-center layout, 12-5/8 in overall length, and 1-3/16 in projection to support consistent cabinet hardware runs. The aluminum construction and Silver Champagne finish define both feel and appearance, while the BP36737SC part number ties every order to this exact handle. When a project calls for a slim 1/2 in wide pull with these specific dimensions, this Separa cabinet pull provides a clearly defined option.