Berenson Edge Pull Series 1" (25 mm) Center to Center Champagne Tab Pull, - 8997-40CZ-P

Berenson Edge Pull Series For Compact Grips

Berenson Edge Pull Series 1 inch describes this compact tab pull designed for tight cabinet layouts where a small, functional grip is needed. The pull is part of the Advantage Two Series, so it follows a coordinated design language for projects using that collection. Its aluminum material provides a light, workable handle that suits cabinet and furniture applications where metal pulls are preferred. The champagne finish delivers a specific color tone that supports designs calling for a warm metallic look on doors or drawers. With a 1 inch center to center mounting dimension, this pull fits installations built around that standard spacing. The 1-25/32 inch overall length keeps the hardware visually compact on small faces while still giving enough finger contact area. A 3/4 inch width and 1-21/32 inch projection define its footprint, which matters where pull size affects layout or front clearance.

Key Edge Pull Details For Cabinet Projects

• The 1 inch center to center measurement sets the hole spacing, which supports repeatable drilling patterns when laying out multiple doors or drawers on a run.
• The 1-25/32 inch length creates a short pull that works on narrow faces, helping maintain proportion on small cabinet fronts or tight panel sections.
• The 3/4 inch width defines the contact band at the edge, giving a consistent visual line when several pulls are aligned across upper or base cabinets.
• The 1-21/32 inch projection establishes how far the pull stands off the surface, which influences front clearance where doors open near walls or adjacent cabinets.
• The aluminum material keeps the pull lightweight yet metal-based, fitting jobs that specify metal decorative hardware in a coordinated finish.
• The champagne finish provides a specific warm metallic appearance, helping match other champagne decorative hardware elements within the same space.

Mounting Dimensions And Fit For This Pull

This Advantage Two Series tab pull uses a 1 inch center to center measurement, so the mounting holes align on that fixed spacing for both new drilling and replacements using the same dimension. Its 3/4 inch base diameter sets the bearing area against the door or drawer surface, which is useful when checking edge clearance or adjacent hardware spacing. The 1-21/32 inch projection defines how far the pull extends from the face, affecting how the user grips it and how it interacts with nearby faces or trim. With a 1-25/32 inch overall length, the pull occupies a small section of the edge, which can be significant on narrow rails or compact drawer fronts where hardware size impacts layout.

Using This Advantage Two Series Edge Pull

Cabinet And Furniture Locations Suited To This Pull

This Berenson Corporation pull is categorized under decorative hardware and moldings, handles and pulls, so it is positioned for cabinet and furniture applications where visible hardware is part of the design. As an Advantage Two Series product, it fits projects that call for a coordinated series look across doors and drawers. The 1 inch center to center layout works on small cabinet doors, narrow drawers, or other panels where larger pulls might crowd the available space. Its compact 1-25/32 inch length helps maintain proportion on modest-sized fronts, which is important in built-ins or tight kitchen and bath runs. The 3/4 inch width supports use on slim rails where wider pulls might approach edges or adjacent details.

Details That Support Consistent Layout And Results

The defined 1 inch center to center dimension allows consistent drilling jigs for repetitive installation, which can speed layout when multiple pulls are used in a job. A 3/4 inch base diameter creates a clear reference footprint on the surface, useful when aligning pulls to stile edges or drawer lines. The 1-21/32 inch projection gives a known stand-off distance, which matters where the pull must clear trim, neighboring doors, or appliance panels. The aluminum construction and champagne finish work together to provide a metal pull with a specific color tone, aiding designers or installers who are matching other champagne components. With a manufacturer part number of 8997-40CZ-P, the pull can be identified precisely on plans or reorder lists, reducing confusion between similar sizes or finishes.

Common Questions About This Berenson Edge Pull

Select This Pull For 1 Inch Layout Projects

This Berenson Edge Pull Series 1 inch center to center tab pull offers defined dimensions and a champagne aluminum construction for cabinet and furniture work. When a project is based around 1 inch hole spacing and a compact pull footprint, this Advantage Two Series model provides a clearly specified option by length, width, projection, and finish. Using the 8997-40CZ-P part number through Wurth Baer Supply aligns ordering and layout with the same hardware details used in planning.