Sliding Pocket Edge Door Pull describes this Sugatsune America pull designed as a sliding pocket edge door pull in the sliding door hardware class. The contemporary handle design can be accessed from the front, back, or edge of the door, which lets users comfortably pull or slide the door from multiple directions in tight or recessed installations. The pull is made from 304 stainless steel, so it provides a strong metal gripping surface that supports repeated use in everyday sliding door applications. Its satin stainless steel finish presents a contemporary appearance, which fits modern residential or commercial woodworking projects where a clean, brushed look is preferred. With dimensions of 1-3/8 inches long by 2-3/8 inches wide, the pull offers a compact footprint that works well on sliding pocket doors where edge space is limited but a defined handhold is needed for controlled door movement.
This Sugatsune America DSI-4254-300-35 pull requires adhesive for installation, such as polyurethane glue or 2-part epoxy, which means the pull is fixed to the door without mechanical fasteners through the face. That installation approach lets the pull sit as designed on the door surface while avoiding through-bolts that might alter the contemporary appearance. Using an adhesive-bonded installation also supports mounting on doors where drilling for traditional hardware is limited by door construction or design choices. Because the handle can be accessed from front, back, or edge of the door, installers can position it on the edge to align with sliding motion or closer to the face where it is more visible yet still easy to reach for everyday operation.
This sliding pocket edge door pull from Sugatsune America belongs to the sliding door hardware category, so it fits applications built around pocket or sliding doors where a slim pull is required. The 1-3/8 inch length by 2-3/8 inch width works on door edges that offer modest surface area, which suits narrow door stiles or slim interior sliding panels. Because the handle can be accessed from the front, back, or edge of the door, it serves openings where the door might be recessed in a pocket or flush along a wall and still needs a handhold from different sides. The contemporary handle design coordinates with modern casework, sliding partitions, or built-in cabinetry that relies on clean, linear hardware instead of more traditional pull shapes.
The use of 304 stainless steel for this pocket door pull provides a robust metal body, which supports consistent operation in sliding door installations that see frequent handling. Its satin stainless finish maintains a consistent brushed appearance, helping multiple doors in the same project present a uniform look when the same DSI-4254-300-35 door pull is used. Because the pull is designed for adhesive installation with products such as polyurethane glue or 2-part epoxy, installers can follow an adhesive-based workflow that avoids through-holes in the door, helping preserve door integrity and the contemporary face design. The ability to access the handle from the front, back, or edge of the door means the same hardware choice can serve varied door positions along the track, which simplifies selection when standardizing on one sliding door pull across several openings.
The DSI-4254-300-35 door pull is a sliding pocket edge door pull in the sliding door hardware category, so it is intended for use on sliding or pocket-style doors rather than hinged doors.
This sliding pocket edge door pull requires adhesive for installation, using products such as polyurethane glue or 2-part epoxy, so the pull bonds to the door surface without face-mounted fasteners.
The Sugatsune sliding door pull measures 1-3/8 inches long by 2-3/8 inches wide, providing a compact footprint that fits on narrow door edges while still offering a defined gripping area.
This pocket door pull can be accessed from the front, back, or edge of the door, allowing users to pull or slide the door from different approach angles in pocket or sliding installations.
This door pull is made from 304 stainless steel with a satin stainless steel finish, which provides a solid metal body and a contemporary brushed appearance for modern projects.
This sliding pocket edge door pull is manufactured by Sugatsune America, positioning it within a recognized builders hardware line for sliding door hardware applications.
The Sugatsune America Sliding Pocket Edge Door Pull in 304 stainless steel brings a contemporary satin finish and compact 1-3/8 inch by 2-3/8 inch size to sliding door hardware work. Its ability to be accessed from the front, back, or edge of the door lets one part handle a range of sliding or pocket door layouts. Adhesive-based installation, using polyurethane glue or 2-part epoxy, supports a clean appearance without face fasteners on the door surface. For projects where sliding door hardware needs a low-profile stainless pull with modern styling, this DSI-4254-300-35 door pull offers a focused solution ready to integrate into your sliding door plan.