Sliding Pocket Edge Door Pull Stainless Steel 500 mm Length is a Sugatsune America handle designed for pocket and sliding doors where a clean, contemporary grip is needed along the edge. The contemporary handle design can be accessed from the front, back, or edge of the door, so the same pull supports opening and closing from either side without extra parts. The 500 mm length runs a substantial span on the door edge, giving a long grabbing surface that helps users control taller or heavier doors more comfortably. The handle uses an adhesive installation with products such as polyurethane glue or 2 part epoxy, which keeps the door face free of mechanical fasteners in the visible area. This handle is part of the sliding door hardware class, so it aligns with projects built around pocket or sliding door systems.
This Sugatsune America DSI-4254-500-35 pull requires adhesive for installation, using products such as polyurethane glue or 2 part epoxy, so it relies on bond strength rather than through-bolting. That adhesive-based mounting keeps the exposed surfaces free of visible fasteners, which is useful where a clean, contemporary look is important on both faces of a sliding or pocket door. Installing with adhesive also avoids drilling through the door for this component, which can help maintain the integrity of slim or detailed door constructions where mechanical fasteners in the pull location are not desired.
The Web Description specifies that the handle can be accessed from the front, back, or edge of the door, so it supports door operation from multiple directions in a single component. On a sliding pocket door, this layout means the user can grasp the edge as the door emerges while still having usable grip surfaces on both faces. Being part of sliding door pulls and sliding door hardware places it directly in the workflow of door assemblies that recess into a wall pocket or slide along a surface track. The 500 mm length helps distribute hand positions over a larger section of the door edge, supporting steady travel when the door is moved from either side.
The DSI-4254-500-35 designation identifies this specific 500 mm satin stainless variant within the DSI-4254 pocket door pull line, which helps track it accurately in project documentation and reorders. The 304 stainless steel material provides a uniform base for the satin stainless finish, so the visual effect of the brushed surface is consistent along the full length of the pull. Because the installation requires adhesive such as polyurethane glue or 2 part epoxy, the handle depends on full-surface bonding rather than point-load fasteners, which contributes to an even feel when the user pulls along its length. The contemporary handle design pairs with the satin finish so the pull reads as a modern, low-glare element that works alongside other stainless fittings on sliding or pocket door jobs.
The Sliding Pocket Edge Door Pull Stainless Steel 500 mm Length is described as sliding door hardware and a sliding door pull, so it is intended for use on sliding or pocket-style doors.
The DSI-4254-500-35 pocket door pull requires adhesive for installation, using products such as polyurethane glue or 2 part epoxy, so the handle bonds to the door rather than using through-bolts.
The Sliding Pocket Edge Door Pull Stainless Steel 500 mm Length has a stated length of 500 mm, providing an extended gripping surface along the door edge for easier door movement.
The contemporary handle design can be accessed from the front, back, or edge of the door, so the same pull serves users approaching the door from either side or at the edge.
This pocket door pull is made from 304 stainless steel with a satin stainless steel finish, giving it a brushed metal appearance suitable for contemporary interior hardware schemes.
The Sliding Pocket Edge Door Pull Stainless Steel 500 mm Length is a Sugatsune America product, identified by manufacturer part number DSI-4254-500-35 in the sliding door hardware class.
The Sliding Pocket Edge Door Pull Stainless Steel 500 mm Length pairs a 500 mm gripping span with a contemporary form that can be accessed from the front, back, or edge of a sliding door. Its 304 stainless steel construction with satin finish supports a modern, brushed-metal look in sliding door hardware layouts. With adhesive-based mounting using products such as polyurethane glue or 2 part epoxy, this DSI-4254-500-35 pull from Sugatsune America delivers a clean appearance without exposed fasteners on the door faces.