Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Double-Sided Oval Grommets describe Sugatsune America LN-72D/WHT, a double-sided adjustable oval grommet designed to finish openings through panels while helping route cables or lines between spaces. The grommet is designed for panel thickness from 1-3/16 inch to 1-9/16 inch, which lets you use it on common casework, closet panels, or partition walls in that thickness range. It also works on 11/16 inch to 1-9/16 inch panels by snapping off an edge, so one part can serve both thinner and thicker panel runs during a project. The cover can be removed to increase the grommet opening, giving extra clearance when you need to pass larger plugs or bundles through. This LN-72D/WHT model is described as useful for restrooms, storage rooms, closets, and laundry rooms, so it fits well in utility and organizational installations where a finished hole and lined pass-through are important.
The LN-72D/WHT double-sided adjustable oval grommet is designed specifically for installation into panels between 1-3/16 inch and 1-9/16 inch thick, so layout planning can follow standard casework thickness in that range. When working with thinner panels from 11/16 inch to 1-9/16 inch, the design allows you to snap off an edge, so the grommet still seats properly and keeps the opening lined. The removable cover feature lets you start with a more closed opening for a neater look around small cables, then open it up when you need more clearance, so one installed part can serve different routing needs over time.
The Sugatsune America LN-72D/WHT is described as useful for restrooms, storage rooms, closets, and laundry rooms, so it is well suited to jobs where services, hoses, or cables must pass through finished panels in workhorse spaces. The double-sided oval grommet layout means the cutout is trimmed on both faces of a partition or cabinet, so penetrations between a closet interior and a room side look finished from each direction. Because it is a double-sided adjustable oval grommet for panel thickness 1-3/16 inch to 1-9/16 inch, it aligns with common panel stock used in closet systems and storage partitions, allowing consistent detailing across a run of units. The ability to work with 11/16 inch to 1-9/16 inch panels by snapping off an edge lets the same LN-72D/WHT part be used where thinner back panels or dividers are present, keeping the visual treatment coherent across mixed constructions. In laundry rooms or storage rooms, the removable cover that increases the grommet opening helps when passing heavier-duty cables or flexible hoses, so penetrations stay lined even when demands change.
This double-sided adjustable oval grommet uses its thickness range from 1-3/16 inch to 1-9/16 inch to seat firmly within typical cabinet or wall panels, so the lined opening stays stable when cables move. When the application falls in the 11/16 inch to 1-9/16 inch band, the option to snap off an edge lets the installer adapt the same part to thinner material, which reduces variation in components while maintaining a snug fit around the cutout. The removable cover that can be taken off to increase the opening provides flexibility in cable management: smaller openings can be used initially to tighten the visual gap, then the larger opening can handle plugs or bundled runs during changes or expansions. Because the product is specified as a double-sided adjustable oval grommet, both sides of the panel benefit from the same lined opening, supporting repeatable, professional-looking terminations in closets, laundry rooms, restrooms, and storage rooms where both access and appearance are important over the life of the installation.
The Sugatsune America LN-72D/WHT is a double-sided adjustable oval grommet, so it lines both faces of a panel opening and allows some adaptability to different panel setups.
The LN-72D/WHT grommet is designed for panel thickness from 1-3/16 inch to 1-9/16 inch, which matches many common cabinet and partition panel thicknesses in woodworking projects.
The LN-72D/WHT can also be used on 11/16 inch to 1-9/16 inch panels by snapping off an edge, so it adapts to thinner materials while still lining the opening.
The removable cover can be taken off to increase the grommet opening, so you gain extra clearance when routing larger connectors or bundled cables through the same cutout.
The product is described as useful for restrooms, storage rooms, closets, and laundry rooms, so it suits utility spaces needing finished, lined pass-throughs in panels.
The double-sided grommet design trims both sides of a panel cutout, so cable pass-through points look finished from each direction and match surrounding casework.
The Sugatsune America LN-72D/WHT double-sided adjustable oval grommet offers a defined thickness range of 1-3/16 inch to 1-9/16 inch, with adaptability down to 11/16 inch panels by snapping off an edge, so one part can serve varied casework. With a removable cover that can increase the opening and suitability for restrooms, storage rooms, closets, and laundry rooms, it delivers a lined, finished route for cables or hoses wherever panels separate spaces. Select this grommet when you need a consistent, double-sided opening treatment across different panel thicknesses in utility and organizational installations.