Sugatsune 5-1/2" Plate Mount Swivel Caster, No Brake, 264 lb, MX-125P

Sugatsune Swivel Caster MX-125P For Controlled Mobility

Sugatsune swivel caster MX-125P is a plate mount caster with a swivel type design, so it supports directional changes where equipment needs to roll and turn in tight spaces. The 5-1/2 inch wheel diameter lets carts or fixtures roll over typical shop floor transitions with less effort, helping keep movement smooth during daily use. A nylon/polyurethane wheel material combination provides a rolling surface that works well on many hard floors and supports consistent movement under load. The caster has a 264 lb load capacity, so it can be applied to medium-duty fixtures that demand dependable support in woodworking or fabrication environments. Its clean appearance helps projects maintain a neat, professional look when casters remain visible. Sold in both broken and full box quantities, this caster supports both small one-off builds and larger shop runs where consistent components are important.

Key Caster Details That Support Daily Work

• The dual brake system can be locked on swivel only or on both wheel and swivel in one step, so users can either control pivoting or fully stop movement to stabilize equipment at a work position.
• A large lock lever for swivel and a small lock lever for wheel give separate, clearly defined controls, helping installers or operators set the desired brake function without fumbling under load.
• Easy operation of the brake levers speeds up repositioning and locking cycles, which helps when carts or fixtures are frequently moved between machines or work cells during a shift.
• When the swivel is locked, the caster works as a rigid type, so straight-line travel becomes more predictable on longer runs, improving tracking down aisles or along benches.
• A clean appearance on the caster body supports projects where the hardware remains visible, helping finished carts or fixtures look organized and intentional in customer-facing or open shop areas.

Plate Mount Caster Setup And Swivel Function

This caster is identified as a plate mount product in the builders hardware, plate mounted casters category, so it is designed to fasten by its mounting plate to the underside of carts or fixtures. The swivel type construction allows the wheel to rotate around a vertical axis, providing steering capability when positioning equipment in confined spaces. A stem is listed as the mounting type, tying the caster design to installations that marry the plate and stem configuration in a single assembly. Together, the plate mount class and swivel style give builders a caster that supports both solid attachment to the structure and smooth directional changes on the floor. This combination suits applications where equipment is regularly moved, then set in place for work operations.

How This Dual Brake Caster Fits Shop Use

Swivel Caster Performance In Work Areas

This caster uses a nylon/polyurethane wheel material, which provides a firm rolling surface that supports even movement across many common hard flooring situations in woodworking and industrial shops. The 5-1/2 inch wheel diameter helps the caster roll over minor floor irregularities and transitions found between work zones, which can reduce resistance when pushing loaded carts. With a 264 lb load capacity, the caster is suited to medium-duty applications where carts, jigs, or fixtures need dependable support under typical shop loads. The swivel type design lets operators angle equipment precisely into position at machines, benches, or storage spots, improving access in tight layouts. When the swivel is locked, the caster functions as a rigid type, so long straight pushes down aisles or along walls stay more controlled. RoHS compliance supports use in environments where restricted substances are a concern, aligning the caster with projects that prioritize regulatory-conscious components.

Brake Control And Mounting For Repeatable Results

The dual brake system allows the caster to be locked on swivel only or on both wheel and swivel in one step, giving users control over how the equipment holds once positioned. Using the large lock lever for swivel, operators can set the caster so it resists turning while still allowing the wheel to roll, which is useful when guiding loads in straight paths. The small lock lever for wheel applies braking directly to the wheel, so equipment can be held in place when a work position is reached. Easy operation of these levers supports quick changes between free-rolling, guided, and fully locked states, which benefits workflows that frequently move carts between stations. As a plate mount caster, it is part of a builders hardware solution designed to secure firmly to the supporting structure, helping maintain consistent tracking and brake behavior over time. The combination of controlled swivel, selective wheel braking, and defined plate mount class supports repeatable handling across multiple identical fixtures in a shop.

Common Questions About The MX-125P Swivel Caster

Select The MX-125P Caster For Controlled Movement

The Sugatsune swivel caster MX-125P combines a 5-1/2 inch nylon/polyurethane wheel, 264 lb load capacity, and a dual brake system that locks swivel, or both wheel and swivel, in one step. With its plate mount class and clean appearance, it supports secure attachment and a professional look on shop-built carts or fixtures. Choosing this caster allows builders to standardize on controlled mobility that fits daily movement, positioning, and holding requirements in woodworking and industrial environments.