
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Rev-A-Shelf waste pullout gives a cabinet interior a dedicated place for sorted trash or recycling with a bottom-mount design and soft-close action. This bottom mount trash pullout from Rev-A-Shelf is a LEGRABOX waste container built with an Orion gray metal frame, a natural maple semi-gloss finish insert, and two 35 quart trash bins with lids. The unit is made for full access 12 inch, 15 inch, and 18 inch base cabinets with 3/4 inch side panels. BLUMOTION soft-close slides help the pullout close quietly, and the included door mounting brackets support attachment to the cabinet door. For buyers planning a base cabinet waste pullout, this model combines a two-bin layout, full-extension access, and a pre-assembled frame for a cleaner install path.
Key specs to confirm: This base cabinet waste pullout is a bottom-mount unit with an overall product reference of 16-1/2 inches and is designed for full access 12 inch, 15 inch, and 18 inch base cabinets with 3/4 inch side panels. The verified configuration includes two 35 quart bins, an Orion gray LEGRABOX frame, a natural maple semi-gloss insert, and BLUMOTION soft-close full-extension slides. Before purchase, confirm your cabinet opening, interior depth, door attachment method, and floor area for mounting. If you need exact cutout, clearance, load, safety, or compliance details, those must be confirmed with the manufacturer or technical documentation.
What's included: Orion gray metal LEGRABOX with maple insert, two plastic trash bins with lids in Orion gray, BLUMOTION soft-close full-extension slides, and door mounting brackets.
What to verify before ordering: Confirm your cabinet is a full access base cabinet, verify 3/4 inch side panels, check that the opening width matches the selected cabinet size, and make sure your door and interior layout allow the pullout and bins to clear hinges, shelves, plumbing, or other obstructions. Follow manufacturer installation guidance and local building requirements where applicable.
A double trash pullout is often chosen when one cabinet needs to handle both trash and recycling without adding freestanding containers to the room. This Rev-A-Shelf waste pullout fits that use case with two 35 quart trash bins and lids in one cabinet-mounted unit. In a kitchen remodel, that can help keep waste handling close to prep and cleanup areas while keeping bins out of sight.
For installers working on framed or full access cabinetry, the verified fit guidance matters. This product is designed for full access 12 inch, 15 inch, and 18 inch base cabinets with 3/4 inch side panels. Buyers should match the selected cabinet size to the opening and confirm that the cabinet floor and door setup support a bottom mount trash pullout with door mounting brackets. If the project includes interior obstacles such as plumbing or fixed shelves, those clearances should be checked before ordering.
The LEGRABOX waste container frame comes fully assembled, which can help when labor time matters. Instead of building up the frame from separate pieces, the installer can focus on cabinet fit, slide alignment, and door connection. Full-extension TANDEM slides with BLUMOTION soft-close also support day-to-day use by bringing the bins forward for easier access and helping the pullout close in a controlled way.
This maple waste pullout can also appeal to buyers who want the inside of the cabinet to look finished, not purely utilitarian. The Orion gray frame and Orion gray bins pair with a natural maple semi-gloss insert, giving the unit a furniture-style interior appearance. If the project may later use TIP-ON or SERVO-DRIVE systems, the product description states that this pullout could be used with those systems, but buyers should confirm exact compatibility for the cabinet and hardware package being installed.
When comparing waste pullouts in general, buyers usually look at mounting style, number of bins, slide action, and what is included. This bottom mount trash pullout is defined clearly in those areas. It is a bottom-mounted unit, not a freestanding can. It is a double-bin model, not a single container. It includes lids, slides, and door mounting brackets, which helps buyers understand what comes in the carton.
Another point of comparison is access. Some waste pullouts do not provide full extension, which can make the rear of the bin area harder to reach. This Rev-A-Shelf model uses full-extension slides with BLUMOTION soft-close, so the containers are designed to move outward for easier access while closing with a controlled motion. For many buyers, that is a practical difference in daily use rather than a cosmetic detail.
Material and finish also affect selection. This model combines an Orion gray LEGRABOX frame with a natural maple insert instead of a plain wire or unfinished interior look. Buyers who want a cabinet accessory that aligns with a more finished kitchen interior may prefer that configuration. At the same time, the product remains a functional base cabinet waste pullout built around plastic bins with lids for routine household use.
Finally, fit should guide the decision more than appearance alone. A buyer comparing options should confirm cabinet class, opening size, side panel thickness, and whether a door-mounted setup is planned. For any dimensions or technical tolerances not shown in the verified product data, the safest step is to confirm them with the manufacturer before installation.
This Rev-A-Shelf waste pullout is designed for full access 12 inch, 15 inch, and 18 inch base cabinets with 3/4 inch side panels. Confirm your exact cabinet opening before ordering.
This double trash pullout includes two 35 quart trash bins with lids in one bottom-mount frame.
This soft close waste container includes BLUMOTION soft-close full-extension slides as part of the verified package.
This bottom mount trash pullout includes door mounting brackets, so buyers can plan for a door-attached installation. Confirm door size and cabinet clearance before install.
This LEGRABOX waste container has an Orion gray metal frame with a natural maple semi-gloss finish insert and Orion gray bins.
The 35 quart trash bins are verified as including lids.
A base cabinet waste pullout requires checking cabinet opening size, interior depth, side panel thickness, floor mounting area, and clearance for hinges or interior obstructions.
This Rev-A-Shelf pullout could be used with TIP-ON or SERVO-DRIVE systems. Confirm exact compatibility with your cabinet and hardware setup before purchase.
The LEGRABOX frame comes fully assembled, which can simplify installation work.
Load and compliance details are not provided in the verified product data. Follow manufacturer installation guidance and local building requirements where applicable.
Soft close waste container buyers should focus on cabinet fit, included hardware, and bin capacity before placing an order. This Rev-A-Shelf model includes a fully assembled LEGRABOX frame, two 35 quart Orion gray bins with lids, BLUMOTION soft-close full-extension slides, and door mounting brackets. It is designed for full access 12 inch, 15 inch, and 18 inch base cabinets with 3/4 inch side panels. Before purchase, confirm your cabinet opening, interior clearance, and door-mount setup so the bottom-mount installation matches your project.
Sold In: 1 Each