Rev-A-Shelf 5LB 16-1/2" Stainless Steel Bottom Mount Waste Pullout with 2-35 Quart Black Bins Soft-Close, 5LB-1835SSBL-218

Stainless Steel Double-Bin Waste Pullout for a Wider Base Cabinet

This Rev-A-Shelf 5LB Series pullout puts two 35 quart black bins inside a stainless steel carriage that rides on soft-close, full-extension slides, giving a 16-1/2 inch base cabinet a complete trash and recycling station behind a single door.

Key Features

• Two 35 quart black bins included arrive ready to load for trash and recycling in one cabinet.
• Stainless steel carriage gives the unit a clean, professional look and lasting durability in a working kitchen.
• Soft-close slides bring both bins back in with a controlled, quiet close on every cycle.
• Full-extension travel pulls the entire bin set clear of the cabinet face for unobstructed access to both bins.
• Door-mount compatible so the bins roll out in step with the cabinet door when a door-mount bracket is added.
• 135 pound weight capacity supports fully loaded bins across the carriage without strain on the slide system.

Two Bins, One Cabinet, One Motion

Keeping trash and recycling in the same cabinet is the practical appeal of a double-bin pullout: one pull of the door and both bins come forward together. This unit is sized for a 16-1/2 inch minimum cabinet opening and requires at least 22 inches of cabinet depth and 20-5/8 inches of height, so it fits a standard-depth base cabinet in most kitchens. The full-extension slides bring both bins completely out of the cabinet, which makes it straightforward to swap a full bag without fishing around in a shallow opening. The stainless carriage pairs cleanly with stainless appliances or hardware elsewhere in the kitchen, so it reads as intentional rather than incidental when the door is open.

Carriage, Slides, and What Ships in the Box

The 5LB Series carriage is finished in stainless steel and holds the two black bins on a bottom-mount, soft-close slide system. Both 35 quart bins are included, so the unit arrives ready to install and use. A door-mount bracket is not included and is sold separately; add one to connect the bins to the cabinet door so they travel with it on open and close. The carriage mounts to the cabinet floor, and the slide system supports up to 135 pounds across the bin set, enough margin for two loaded household bins at once.

Where This Pullout Fits Best

This is the right choice for a kitchen remodel or a cabinet shop specifying a dual-waste station in a base cabinet with at least a 16-1/2 inch opening. The stainless finish makes it a natural match for modern or transitional kitchens where metal finishes are already in play on appliances or pulls. Designers specifying trash and recycling separation in a single cabinet will find the double-bin setup covers both without requiring adjacent cabinet space. Cabinet installers should confirm the opening width, depth, and height against the minimums before the unit ships to the job.

Common Questions

A Complete Dual-Waste Station, Ready to Install

This stainless carriage with two black bins and soft-close, full-extension slides is a one-order solution for trash and recycling in a standard-depth base cabinet, without sacrificing the finish quality that a working kitchen demands.