
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
1100mm push knob bar is a tall cabinet door latch system that uses a push-in knob to lock the door, supporting clean fronts while securing access. The bar length spans 43-5/16 inches, covering full-height doors on tall storage runs. A center latch with dead bolt provides the primary locking action, so the door engages firmly each time the knob is pressed in. Top and bottom cams connect that center lock point to both ends of the door, spreading the holding points to reduce door twist when locked. The latch is applicable from 19 mm (3/4 inch) to 30 mm (1-3/16 inch) door thickness, giving flexibility across common cabinet construction. The nickel finish gives the push knob bar a neutral appearance that blends into many hardware programs while still supporting a consistent, professional look on tall cabinets.
The latch is applicable from 19 mm (3/4 inch) to 30 mm (1-3/16 inch) door thickness, so installers can use the same push knob bar across varied door constructions without changing the lock style. This range covers many frameless and framed cabinet door builds, supporting consistent drilling setups on different cabinets. The 1100mm (43-5/16 inch) bar length lets the locking action span most tall cabinet doors, so the center latch, dead bolt, and cams can be positioned to match the door height and layout. With a center latch using a dead bolt and linked top and bottom cams, the system focuses on positive engagement at the push knob while tying that movement to both ends of the door for more even locking.
This push knob bar is described as suitable for tall cabinet doors, so it is aimed at applications where door height calls for more than a single-point catch. The 1100mm (43-5/16 inch) length lets the bar reach from near the top to near the bottom of a tall door, so the top and bottom cams can be arranged to engage at both ends. That layout supports storage cabinets, tall pantry-style doors, or utility enclosures that benefit from multi-point locking. Because the latch is applicable from 19 mm (3/4 inch) to 30 mm (1-3/16 inch) door thickness, it can be used on a variety of tall door constructions across different cabinet lines using that thickness range. The nickel finish keeps the hardware visually neutral, allowing it to work within a wide mix of cabinet styles where a metallic appearance is appropriate.
The center latch with dead bolt creates a defined main lock point, giving repeatable engagement each time the knob is pressed in and helping the door close to the same position on every cycle. When the door will be locked as the knob is pushed in, the user action is simple: push once to secure the door, which can reduce training needs in shared spaces. Top and bottom cams connect this center action to both ends of the door, spreading the locking effect across the full bar length. That distribution can help tall doors stay pulled in at the top and bottom, not just at mid-height, which is important when the door carries weight or sees frequent use. The 1100mm bar length provides the room necessary for those cams to operate on a tall door, giving the installer flexibility when placing the contact points relative to cabinet structure.
The 1100mm push knob bar is described as suitable for tall cabinet doors, so it is intended for full-height or extended-height cabinet door applications within that category.
The push knob bar uses a center latch with dead bolt and top and bottom cams, so pressing the knob in locks the door at the center and ties that action to both ends.
The latch is applicable from 19 mm (3/4 inch) to 30 mm (1-3/16 inch) door thickness, covering a range of common cabinet door builds within that thickness window.
The 1100mm (43-5/16 inch) bar length lets the locking action reach from center to top and bottom cams, helping tall cabinet doors stay secured along their full height.
The center latch with dead bolt provides the primary locking point, giving a firm, defined engagement when the knob is pushed in and acting as the anchor for the cams.
The nickel finish gives the push knob bar a neutral metallic look that works with many hinge and pull finishes, supporting consistent visual hardware coordination on projects.
The TLP-1100/NI push knob bar from Sugatsune America combines a center latch with dead bolt and top and bottom cams, giving tall cabinet doors multi-point locking from a single push action. The 1100mm (43-5/16 inch) length supports tall door layouts, while the 19 mm (3/4 inch) to 30 mm (1-3/16 inch) applicable door thickness range covers many cabinet constructions. The nickel finish offers a straightforward look that coordinates with common hardware lines. For projects that call for a tall cabinet latch using a push knob bar, this configuration provides a defined locking method tailored to that role.