1500mm push knob bar nickel is a Sugatsune America latch designed for tall cabinet doors, so it gives long vertical reach along the door edge where full-height locking is needed. The 1500mm overall length spreads the locking points from a central knob up to the top and down to the bottom of the door, which helps hold the door closed at multiple points. The center latch with dead bolt forms the main secure point at a convenient operating height, which keeps the primary locking action where users naturally reach. Top and bottom cams connect to this center latch, extending the lock to both ends of the door so the door edge is held more evenly. The door will be locked when knob is pushed in, giving a clear locked position that can be triggered with one motion. Applicable door thickness from 19 mm to 30 mm allows the same bar to work across common cabinet constructions in that range.
This Sugatsune America push knob bar is applicable from 19 mm (3/4") to 30 mm (1-3/16") door thickness, so it matches a defined range of cabinet door constructions without reworking the door slab to suit the latch. The long 1500mm bar format fits tall cabinet doors, allowing the cams and latch to be placed where the door rails and stiles support the load. With the door locked when knob is pushed in, the installer can position the operating knob at a comfortable height while still linking to top and bottom cams. The combination of a center latch with dead bolt and the two cams means the alignment of the bar along the door edge directly affects how cleanly the door seats when locked.
This 1500mm push knob cabinet latch bar is suitable for tall cabinet doors where a single standard catch would not control the full door height. The long bar layout allows the center latch with dead bolt to sit at hand height while the top and bottom cams extend locking force toward each end of the door. Because the product is applicable from 19 mm to 30 mm door thickness, it fits doors built from materials and constructions that fall within that thickness band. When the knob is pushed in, the latch engages and the cams follow, so the door is locked along the bar length. This layout suits cabinets where controlling warp or flex along a tall door edge is important during regular opening and closing.
The center latch with dead bolt on this TLP-1550/NI push knob bar provides a defined primary locking point, which helps the door pull into the frame at a predictable location every time. By linking top and bottom cams to this same latch, the system shares that movement along the door, reducing localized stress and distributing the closing pressure. The action where the door will be locked when knob is pushed in turns that multi-point system into a single-step motion, which keeps operation consistent for repeated use. The specified applicability to 19 mm to 30 mm door thickness means the relationship between latch and door edge stays within the intended range, supporting a more uniform fit when the bar is used across multiple tall cabinets in the same project.
This 1500mm push knob bar is suitable for tall cabinet doors, so it is used where a long vertical latch is needed along the door edge.
This push knob bar locks the door when the knob is pushed in, so one motion engages the center latch with dead bolt and connected cams.
This Sugatsune America bar is applicable from 19 mm (3/4") to 30 mm (1-3/16") door thickness, so it fits doors built within that range.
The top and bottom cams extend the center latch action to both ends of the door, helping hold tall doors closed more evenly along their height.
The center latch with dead bolt provides the main locking point, so it becomes the primary location where the tall cabinet door is secured.
The 1500mm length suits tall cabinet doors by spanning most of the door height, allowing multi-point locking from a single push knob.
This TLP-1550/NI Sugatsune push knob bar pairs a center latch with dead bolt and top and bottom cams in a 1500mm length, so it supports multi-point locking on tall cabinet doors. With a defined applicability from 19 mm to 30 mm door thickness, it targets common cabinet constructions in that thickness band. For projects that call for tall cabinet doors secured from a single push knob position, this bar provides a locking layout that spreads control along the door edge while keeping operation straightforward.