Lift Assist Mechanism 550 - 650 PSI from Sugatsune America is a lift-assist mechanism designed for flap-style doors, so the door can open smoothly while reducing the effort needed to raise it. The mechanism is described as a lift-assist for extra light-opening, which supports users when operating heavier or taller doors frequently throughout the day. This EZS-ELAN-MM system allows the door to stay in any desired position, letting installers set up flap doors that hold where the user leaves them for easier access to the cabinet interior. A damper equipped design provides soft and silent closing at the end of travel, which helps protect the cabinet and door front from impact over repeated use. The slim design and installed location maximize space inside of the cabinet, supporting storage layouts that depend on full interior clearance.
This EZS flap door lift mechanism uses a simple installation method by aligning the body to the edge of the cabinet, which streamlines layout because the cabinet edge becomes the primary reference. Door height is adjustable horizontally plus or minus 3/64 inch and vertically plus or minus 5/64 inch, so installers can fine-tune reveals and align neighboring doors after mounting. The door opens over the cabinet, and the specified 4-5/16 inches of required space above the cabinet guides where to position upper gables, shelves, or soffits during planning. Because no hinges or connecting bar are needed, the installer works with a cleaner setup that focuses on the lift mechanism and door alignment adjustments.
The EZS-ELAN-MM lift-assist mechanism from Sugatsune America is intended for flap doors that open over the cabinet, so it is well suited to upper cabinets where a top-hinged motion is preferred. The system is described as a lift-assist mechanism for extra light-opening, which means the internal action supports the weight of the door as it swings upward, reducing user effort during repeated openings. Because the door stays in any desired position, users can open the flap only as far as they need and leave it there while working at the cabinet, which can be helpful in tight runs of wall cabinets where full travel is not always necessary. The slim design and installed location maximize space inside of the cabinet, so shelves and stored items can extend closer to the sides without being blocked by bulky hardware.
This damper equipped lift mechanism delivers soft and silent closing at the end of the motion, which helps maintain a controlled close that is kinder to the cabinet structure over thousands of cycles. The product has successfully passed 30,000 open and close private cycle tests, so the lift and damping functions have been exercised repeatedly under test conditions, supporting long-term performance expectations in busy environments. Door height adjustability of horizontal plus or minus 3/64 inch and vertical plus or minus 5/64 inch is built into the mechanism, letting installers correct minor cabinet or door variations without re-drilling major mounting points. The body is installed by aligning it to the edge of the cabinet, giving a straightforward reference line that supports consistent installation across multiple cabinets in a run. No hinges or connecting bar are needed, reducing the number of separate components that must work together for reliable movement and simplifying later adjustments when cabinet conditions change.
The EZS-ELAN-MM is a lift-assist mechanism where the door opens over the cabinet, so the flap pivots upward above the cabinet front for overhead access.
This lift-assist mechanism requires 4-5/16 inches of space over the cabinet, guiding cabinet layout where soffits, lights, or other components sit above the doors.
The lift-assist mechanism allows the door to stay in any desired position, so users can leave the flap partially or fully open without support.
The damper equipped feature provides soft and silent closing at the end of travel, reducing impact on the cabinet and improving noise control.
This lift mechanism provides horizontal adjustment of plus or minus 3/64 inch and vertical adjustment of plus or minus 5/64 inch to fine-tune door height.
Installation is described as simple by aligning the body to the edge of the cabinet, giving a clear reference for consistent mounting from unit to unit.
The EZS-ELAN-MM Lift Assist Mechanism 550 - 650 PSI from Sugatsune America combines lift-assist action, position-holding capability, and a damper equipped closing sequence in a slim format that maximizes cabinet interior space. Its requirement for 4-5/16 inches of space over the cabinet and the alignment of the body to the cabinet edge define clear installation boundaries that support dependable layout. Door height adjustment of horizontal plus or minus 3/64 inch and vertical plus or minus 5/64 inch helps dial in clean reveals in finished work. For flap doors that open over the cabinet and benefit from extra light-opening operation, this lift mechanism provides a focused solution ready for repeated daily use.