OVN-5L soft-close flipper door mechanism uses Sugatsune Americas patented Lapcon technology to give over-the-top flipper doors smooth, quiet motion, which helps reduce impact on the cabinet and door during every open and close. This left-hand mechanism is designed for doors weighing 6.6 to 15.4 lb, so it suits medium-weight flipper fronts commonly found in work surfaces and cabinets. The mechanism is specified for approximately 15-3/4 inch door height, aligning door geometry with the internal arm and travel to keep the motion controlled. A steel arm and mounting plate form the working structure, adding strength at the pivot points where the load is carried during the lift and return stroke. The unit is designed to operate at room temperature, so motion and closing behavior remain consistent in typical interior woodworking environments.
This soft-close mechanism is specified for approximately 15-3/4 inch door height, which aligns the internal geometry with typical over-the-top flipper doors so the motion track follows the cabinet face cleanly. The mechanism is rated for doors from 6.6 to 15.4 lb, and operating within this range keeps the Lapcon soft-close cartridge working in its intended window, so the door neither drops too fast nor resists closing. A travel length of 13-3/4 to 15-3/4 inches, with 10-1/4 inch travel length noted, defines the path the door will follow as it lifts and retracts, which is important when laying out clearances above and inside the cabinet. The steel arm and mounting plate provide fixed reference points once mounted, helping keep the action consistent after installation.
This Sugatsune America lid support and up stay is designed for over-the-top flipper doors, placing it in lift assist applications on cabinets and work surfaces where the door needs to rise and park above the opening. The approximate 15-3/4 inch door height specification targets medium-height fronts, so the arm geometry lines up with common case dimensions in this class. A door weight range of 6.6 to 15.4 lb means it works with many wood or composite doors used in furniture, office, and shop cabinetry. The 13-3/4 to 15-3/4 inch and 10-1/4 inch travel length values define the motion envelope, so the door arcs up and over the opening rather than swinging out into the work area. Designed to operate at room temperature, the motion characteristics remain steady in typical interior woodworking and shop conditions, supporting predictable day-to-day operation.
The patented Lapcon technology is engineered to deliver smooth and quiet motion, which matters when doors are cycled repeatedly because it reduces vibration that can loosen fastenings over time. The soft-close behavior that keeps doors from slamming shut protects the cabinet and hinges from sudden impact, helping maintain gaps and reveals after many open/close cycles. Adjustable closing speed allows fine-tuning of the return stroke, so within the 6.6 to 15.4 lb rating the installer can set a closing profile that feels controlled rather than abrupt. The successful 30,000 open/close cycle test indicates the mechanism is built to handle high-frequency use, which supports consistent performance in demanding environments such as commercial or busy residential spaces. The steel arm and mounting plate carry the door load through the full 13-3/4 to 15-3/4 inch travel path, helping keep alignment stable so the over-the-top flipper door tracks the same way every time it is used.
The OVN-5L soft-close flipper door mechanism is designed for over-the-top flipper doors, so the door lifts and moves above the opening instead of swinging straight out.
The soft-close lid support is rated for doors from 6.6 to 15.4 lb, which keeps the Lapcon damping system operating in its intended range for controlled motion.
This Sugatsune soft-close mechanism is specified for an approximately 15-3/4 inch door height, matching the arm geometry to typical medium-height flipper fronts.
The adjustable closing speed on this mechanism lets you set how quickly the door settles within its 6.6 to 15.4 lb rating, so the return feels controlled.
The 30,000 open and close cycle test shows the OVN-5L soft-close flipper door mechanism is built to handle frequent use while maintaining its motion characteristics.
The steel arm and mounting plate on this mechanism provide a strong linkage between cabinet and door, helping keep alignment steady through repeated cycles.
The OVN-5L soft-close flipper door mechanism from Sugatsune America pairs patented Lapcon technology with a 6.6 to 15.4 lb rating and approximately 15-3/4 inch door height specification, giving over-the-top flipper doors controlled motion suited to repeated daily use. With adjustable closing speed, steel arm and mounting plate construction, and successful 30,000 cycle testing, this left-hand lid support and stay is built to provide consistent soft-close performance on cabinets and work surfaces where quiet, managed door operation matters.