Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Edgebanding 7925 Designer White .020" Thick x 15/16" Width is PVC edge banding from Doellken Woodtape that finishes exposed panel edges to match Designer White surfaces, so cabinets and casework carry a consistent, project-ready appearance along every run.
The .020" thickness provides a slim edge profile that covers substrate edges while keeping a tight, low-build look, which suits straightforward cabinet jobs where a thin, neat edge detail is preferred over a heavier band.
The 15/16" width gives coverage across common panel thickness with a bit of working tolerance, allowing installers to position, trim, and flush the edge band for an even line without exposing the core material.
The PVC construction defines this product as part of the Edgebanding & Surfacing class, so it integrates into typical shop workflows wherever PVC edge treatments are specified on cabinets, fixtures, or furniture components.
This edge banding is classified as PVC Edgebanding & Surfacing, so it works within standard edgebanding processes used in cabinet shops that are already set up for PVC materials.
The .020" thickness works with tools and trimmers suited to light PVC edging, which helps maintain a controlled cut and a crisp shoulder between the face and the edge on finished components.
The 15/16" width lines up with many panel builds where the edge band is trimmed back to the face, letting installers run a consistent process from part to part without constant width changes.
The Designer White color position and specific matches listed in the web description keep this product aligned to white decorative schemes, which matters when building coordinated runs of cabinetry or fixtures.
This edge banding belongs to the Edge Banding product class and is branded by Doellken Woodtape, placing it in workflows where PVC edgebanding is applied to laminated or finished panel cores in cabinet and woodworking shops.
The Designer White color match to Decorative 949 White Standard rated as Good gives shops that use that decorative surface a defined option for edge treatment, so door fronts, end panels, and filler strips can share the same white tone.
The Good match to Roucke Designer White supports projects that specify that finish, allowing both vertical and horizontal parts to carry the same general white appearance from field to edge.
The EBM Brava Texture attribute connects this banding to Brava-textured decorative materials, letting the edge better coordinate visually with textured faces where a flat edge could otherwise appear out of place.
The 600FT/RL description supports production where multiple cabinets, drawer fronts, and panels are edged from one roll, helping maintain color and texture continuity across all related parts in the job.
The 15/16" width and slim .020" profile complement casework where an exposed PVC edge is acceptable and where the intent is a clean, minimal edge line rather than a thick edge detail.
The combination of .020" thickness and PVC material means this edge banding behaves predictably under typical PVC edgebanding equipment, helping installers achieve repeatable trimming and scraping results from part to part.
The 15/16" width allows a small overhang on common panel builds, giving room for trimming while still aligning the final edge directly with the face, which helps maintain straight, uniform reveals on doors and panels.
The Good-rated color match to Decorative 949 White Standard and Roucke Designer White gives finish departments a defined expectation of how edges will relate to those specific whites, reducing visual surprises when components are brought together.
The alignment with EBM Brava Texture signals that the surface of the banding is intended to visually relate to Brava-textured decorative faces, which supports a more unified look when panels are viewed at eye level or across longer runs.
The PVC Edgebanding & Surfacing classification keeps this product in line with established cabinet and fixture builds that specify PVC edge treatments, supporting consistent material selection across projects that call for edge banding solutions.
The Manufacturer Part # 7925EBM-1520-1 identifies this exact color, thickness, and width combination, which matters for reorders and for matching previously completed installations that used the same Doellken Woodtape edgebanding.
This edge banding has a .020 inch thickness and 15/16 inch width, providing a thin PVC edge that covers typical panel thickness with enough material for trimming to a clean line.
The Edgebanding 7925, Designer White is PVC edge banding, so it fits applications where PVC Edgebanding & Surfacing materials are specified for cabinet and woodworking projects.
The web description states a Good color match to Decorative 949 White Standard, so edges finished with this banding are intended to coordinate visually with that decorative white surface.
The web description lists a Good match to Roucke Designer White, making this banding suited to edging components that use that specific Roucke Designer White finish.
EBM Brava Texture indicates the surface texture type on this PVC banding, so its feel and look are intended to relate to Brava-textured decorative materials in a project.
This product is identified as Edgebanding 7925, Designer White .020 inch Thick x 15/16 inch Width, with Manufacturer Part # 7925EBM-1520-1 and SAP description referencing 600FT/RL.
Edgebanding 7925, Designer White .020" Thick x 15/16" Width from Doellken Woodtape gives a PVC edge option that aligns with Decorative 949 White Standard, Roucke Designer White, and EBM Brava Texture projects.
Use this specific 7925EBM-1520-1 edge banding when a .020" thin PVC profile, 15/16" coverage, and these defined Designer White color matches are required across cabinet and casework runs.
Sold In: 600 Lineal Ft