PVC edgebanding 15/16 x 600 roll describes a continuous 600-foot roll of PVC edge banding that is 15/16 inch wide, giving casework, shelving, and panels a uniform finished edge along long runs without constant reloading or segment cutting. The 0.018 inch thickness keeps the profile slim, so the edge transitions closely match laminate faces for a low-build look around doors and cabinet parts. The Doellken Woodtape brand identifies a dedicated edgebanding manufacturer, aligning this roll with trade-focused edge finishing on laminate-based projects. The color 2008 Designer White ties the edge directly to light, contemporary panel colors where a consistent white tone is important across a full job. As a PVC edge band, it suits projects where a PVC material edge is preferred alongside laminate surfaces.
The 15/16 inch dimension on this PVC edge banding gives enough coverage for common substrate thicknesses while leaving material for trimming, which supports clean alignment with laminate or surfacing layers after bonding. The 0.018 inch thickness limits the transition between the face material and the edge, which matters where doors or panels meet and users expect a relatively flush feel. The 600-foot roll length suits both shop runs and on-site use because it carries enough material to edge a series of cabinets or panels without frequent material changes. The color 2008 Designer White focuses this band on light-color builds where visual match along the edge is a key part of the finished look.
The color 2008 Designer White defines this PVC edgebanding for projects that need a specific designer-oriented white tone on exposed edges, so cabinet fronts, shelving, and partitions can carry the same color from face to edge. The laminate match detail referencing Arclin W7696 Glacier White indicates that this band is tuned toward installations using that laminate, helping the edge color sit naturally beside that surface in finished work. The laminate match reference to Nevamar S7036 Precision White shows that the same color target supports projects built around that laminate, aligning the edge visually with those panels. Positioning this product in the Edgebanding & Surfacing category and Edge Banding product class frames it for use wherever panel edges transition from raw core to a visible surface. As PVC edgebanding, it fits applications where an applied PVC strip is used to cover exposed substrate edges on laminate-based casework, fixtures, or furniture components.
The 15/16 inch width gives an installer a modest overhang past common panel thicknesses, leaving material to trim back for a straight, controlled edge line without exposing core material. The 0.018 inch gauge influences how the band responds at corners and door or drawer gaps, keeping added bulk low so adjacent parts can align closely once the edges are trimmed. The 600-foot roll format keeps color and sheen consistent along many parts in a run, because every piece draws from the same continuous PVC band rather than short segments. Using the color 2008 Designer White across all edges in a project helps keep the sightlines of cabinet banks, tall panels, and shelving visually unified where white laminate faces are specified. The manufacturer part number 2008-1518-1 identifies this exact color and size combination, which helps shops reorder the same band for future phases or repeat jobs that rely on the same designer white match.
This PVC edgebanding is 15/16 inch wide, 0.018 inch thick, and supplied in a 600-foot roll, which fits extended edging runs on cabinets or panels.
The 2008 Designer White color gives edges a consistent designer-focused white tone, which supports clean visual alignment with light laminate faces on cabinets and fixtures.
This PVC edgebanding lists laminate matches to Arclin W7696 Glacier White and Nevamar S7036 Precision White, helping the edge color track closely with those surfaces.
The 0.018 inch thickness keeps the edge profile relatively slim, which helps maintain a smooth transition between laminate faces and banded edges after trimming.
The 600-foot roll length supports longer production or installation runs, reducing roll changes and keeping edge color consistent across many parts.
Doellken Woodtape branding identifies this as a dedicated PVC edgebanding product, positioning it for laminate-based cabinet, fixture, and furniture edge finishing tasks.
This PVC edgebanding 15/16 x 600 roll with 0.018 inch thickness, in color 2008 Designer White, is positioned for projects that need a specific designer-oriented white edge on laminate-based work. The laminate match notes to Arclin W7696 Glacier White and Nevamar S7036 Precision White focus its use where those panel colors are present. The 600-foot roll format and 15/16 inch width support trade shops and installers handling repeat cabinet, shelving, or partition runs. For work requiring Doellken Woodtape PVC edgebanding in this exact color and size, this roll aligns with that specification.
Sold In: 600 Lineal Ft