overlay angle hinge for 3/4 surface identifies this Sugatsune Free Swinging 3/4 inch overlay angle hinge as designed for surface-mount doors, so installers can plan overlay layouts around a predictable hinge geometry. The semi-concealed hinge style keeps most of the hardware out of sight while still leaving a visible knuckle line, which helps alignment checks on cabinet runs. The satin nickel finish provides a neutral, professional look that ties in with common satin nickel knobs and pulls, so door hardware presents as a unified set. As a free swinging hinge, the AHW-20/SN allows the door to move without built-in damping or closing force, giving straightforward, predictable motion that suits many utility and cabinet applications. Being part of Sugatsune Americas specialty hinge line, this model targets situations where overlay, appearance, and clear door spec limits need to be coordinated on the drawing.
This semi-concealed angle hinge is identified for surface mount at a 19.5 mm, or 3/4 inch, door thickness, so the mounting geometry assumes full overlay on that edge build. The screw-on description indicates the hinge is designed for direct mechanical fastening, allowing installers to use established drilling patterns for semi-concealed layouts. With 7 holes in the hinge, fasteners can be spread across door and frame contact points, which supports a firm installation when doors are cycled over time. The 4-knuckle construction defines the pivot line, giving a clear physical reference during installation to align multiple doors. Because the product is also described with recess-mount thickness values in the same family, drawings can distinguish between surface-mount and recess-mount variants while preserving consistent hinge behavior.
The Sugatsune AHW-20/SN overlay angle hinge is described for a 3/4 inch, or 19.5 mm, surface-mount door, which matches common cabinet door stock and simplifies material procurement. Using the stated maximum door width of 450 mm, or 17-3/4 inches, installers can plan door pairs across a cabinet run so each leaf remains within the hinge parameters. The maximum door height of 700 mm, or 27-9/16 inches, fits many wall and base cabinet fronts, allowing a unified hinge type on multiple openings where sizes fall within those limits. The 2.6 kg, or 5.7 pound, per-pair rating lets builders relate hinge selection directly to the actual door material and dimensions on their cut list. As a semi-concealed hinge in satin nickel, it pairs well with visible decorative hardware while keeping the working mechanism mostly out of sight, supporting clean cabinet lines that still show a defined hinge joint.
The 7-hole layout on this semi-concealed hinge offers multiple fastening positions across the leaf, which distributes loads into both door and cabinet members and supports stable alignment during service. The 4-knuckle design sets a defined pivot axis, so matching hinges on the same door share a common swing path that helps reduce racking. The free swinging action means the hinge does not add closing resistance, so the door movement reflects the weight and dimensions already stated in the recommendations. By following the listed limits of 450 mm width, 700 mm height, and 2.6 kg per pair, the hinge operates within its described range, supporting smooth operation across normal use cycles. The satin nickel finish coordinates visually with many cabinet hardware lines, letting shops carry one hinge appearance through a project when dimensions align with the Sugatsune AHW-20/SN door specification range.
The AHW-20/SN surface-mount configuration is recommended for 19.5 mm, or 3/4 inch, door thickness, which lines up with standard cabinet door panels in many shops.
This hinge is recommended for doors up to 450 mm wide and 700 mm high, so cabinet layouts can keep openings within these limits for appropriate hinge performance.
The Sugatsune AHW-20/SN hinge is described for a maximum door weight of 2.6 kg, or 5.7 pounds per pair, guiding door material and size choices in cabinet projects.
The product class lists this model as a semi-concealed hinge, so part of the hinge is visible as a knuckle line while most of the mechanism sits out of primary view.
This overlay angle hinge is described with a satin nickel finish, providing a muted metallic look that coordinates with satin nickel pulls and other cabinet hardware.
The manufacturer part number AHW-20/SN identifies this specific Sugatsune overlay angle hinge variant, tying drawings and orders directly to the 3/4 inch surface-mount specification.
The Sugatsune Free Swinging 3/4 inch Overlay Angle Hinge AHW-20/SN pairs a satin nickel, semi-concealed form with clearly defined door limits for width, height, thickness, and weight. For projects using 3/4 inch surface-mount doors within those dimensions, this hinge ties design decisions to stated performance ranges. Order the Sugatsune America AHW-20/SN from Wurth Baer Supply when a 3/4 inch overlay angle hinge with documented door specifications aligns with your cabinet layout.