Sugatsune Free Swinging 1" Overlay Hinge provides an overlay angle hinge solution in satin brass for projects calling for a semi-concealed look on a 1 inch surface. As a semi-concealed hinge, it keeps the hardware mostly out of sight while still allowing an overlay configuration, which helps maintain a clean face on the cabinet or casework. The 1 inch overlay design defines how the door overlays the surface, which guides layout when planning door reveals. A load capacity of 5.7 lbs. per pair supports lighter doors within that limit, which matters when sizing doors to prevent sagging. The maximum door height of 27-9/16 inches and maximum door width of 17-3/4 inches give clear boundaries for door dimensions so doors operate smoothly within the hinge's range. Matching these door sizes with the hinge capacity supports consistent swing and alignment in regular use.
This overlay angle hinge is described as a semi-concealed hinge, which shapes how it sits on the cabinet and how much of the hardware shows around the door edge. The 1 inch overlay description indicates how far the door overlays the supporting surface, guiding layout for reveals and door spacing. Minimum door thickness of 1-1/16 inches for recess mounting and 1 inch for surface mounting sets clear starting points when building or selecting doors, helping match edge thickness to the chosen installation style. With a load capacity of 5.7 lbs. per pair, maximum door height of 27-9/16 inches, and maximum door width of 17-3/4 inches, the hinge works within a defined door size and weight range that supports predictable swing and alignment during everyday operation.
This Sugatsune Free Swinging 1" Overlay Hinge in satin brass is positioned within specialty semi-concealed hinges, which points it toward cabinetry or similar casework where a partly hidden hinge is preferred. The 1 inch overlay designation ties it to applications where the door overlays the face by that amount, helping match it to layouts that call for a specific overlay measurement. Minimum door thickness of 1-1/16 inches for recess mount and 1 inch for surface mount makes it suitable for doors built to those thicknesses, which is common in many cabinet and furniture projects. Its maximum door height of 27-9/16 inches and maximum door width of 17-3/4 inches align it with smaller, lighter doors such as those on upper cabinets, narrower base cabinets, or furniture doors that fall within those dimensions. A load capacity of 5.7 lbs. per pair supports these smaller doors when kept within that weight limit.
The semi-concealed hinge classification gives a predictable mounting style, helping installers plan consistent inset and reveal around the hinge side because most of the hardware is tucked out of direct view. The 1 inch overlay description provides a defined overlay dimension, which supports repeatable layout across multiple doors when spacing margins and aligning door edges. Minimum door thickness values of 1-1/16 inches for recess mount and 1 inch for surface mount shape edge preparation, guiding how much material is available around the hinge mounting area for screw engagement and stability. Defined maximum door height of 27-9/16 inches and width of 17-3/4 inches help standardize door cutting and construction so multiple doors share the same working parameters. The 5.7 lbs. per pair load capacity ties directly to material choice and door size, supporting repeatable performance across a run of doors built to similar weight and dimension targets.
The Sugatsune AHA-24/SB is a semi-concealed overlay angle hinge, which means most of the hinge is hidden while the door overlays the cabinet surface for a cleaner appearance.
This hinge supports doors up to 27-9/16 inches high and 17-3/4 inches wide, which sets clear boundaries for door cutting and helps doors operate smoothly.
The AHA-24/SB hinge has a load capacity of 5.7 lbs. per pair, which suits lighter doors built within that weight range for consistent swing and alignment.
This overlay angle hinge works with minimum door thickness of 1-1/16 inches for recess mounting and 1 inch for surface mounting, guiding door construction.
The AHA-24/SB hinge has a satin brass finish, which helps coordinate visible hinge portions with other brass hardware on the project.
The 1 inch overlay defines how far the door overlaps the cabinet surface, which helps set reveals and align multiple doors on the same run.
The Sugatsune Free Swinging 1" Overlay Hinge in satin brass offers a semi-concealed option when a 1 inch overlay layout and brass appearance are needed on smaller doors. With defined limits for door height, width, and thickness, along with a 5.7 lbs. per pair load capacity, it supports projects that stay within these parameters. For work that calls for a specialty overlay angle hinge with a semi-concealed look, this AHA-24/SB hinge provides the measurements needed to plan door sizing and layout.