Sugatsune Free Swinging overlay angle hinge is a semi-concealed hinge designed for 1 inch overlay doors on cabinets that need specialty hinging. This hinge is part of the Sugatsune America line, so it fits into professional-grade hardware layouts where precise motion control is important. As a semi-concealed hinge in the Specialty Hinges category, it leaves only a small portion visible, which helps maintain a clean cabinet face while still giving easy access to the hinge for adjustments or replacement. The satin nickel finish described as NKL gives a neutral metal look that blends into many cabinet projects and helps maintain a unified appearance across different hardware runs. With a defined product class and brand, installers can match this hinge to other Sugatsune components in the same job.
This Sugatsune overlay angle hinge is described as screw-on, so it installs using a standard screw-driven process familiar to cabinet shops and serious DIY users. The minimum door thickness is 1-1/16 inch for recess mount and 1 inch for surface mount, which lets installers choose between routing a recess or mounting directly to the surface while staying within the hinge design range. The hinge is designed for a 1 inch overlay on the surface, so it helps define door position relative to the cabinet case when laying out frameless or specialty face applications. As a semi-concealed hinge with these thickness ranges, it works well in builds where the door is substantial enough to resist warping yet still needs controlled overlay geometry.
The manufacturer part number AHA-24/SN identifies this hinge as a Sugatsune Free Swinging 1 inch overlay angle hinge, making it suitable for cabinets that require a defined overlay and an open-swing action. The max door height of 27-9/16 inches frames the hinge for smaller to mid-size doors, so it fits well on upper cabinets or utility doors inside built-ins where door size stays within that range. The max door width of 17-3/4 inches further narrows the ideal door panel size, which helps installers select door dimensions that match the hinge capacity and reduce stress on the leaf and knuckles. With a load capacity of 5.7 lbs per pair, the hinge is suited for relatively light doors, so it works well with modest-size cabinet fronts rather than heavy solid-core panels.
The semi-concealed design is part of the Hinges and Specialty Hinges categories, which places this hinge in applications where the hardware should support function without dominating the cabinet appearance. In that role, the satin nickel finish gives a professional look that does not distract from door material or finish. The combination of defined height, width, and weight parameters lets project planners design doors that respect these limits, which supports smoother operation over the life of the installation when panels fall within the specified range.
The specified 1-1/16 inch minimum door thickness for recess mounting and 1 inch minimum thickness for surface mounting give clear thickness thresholds, so doors can be milled or selected to fall within those boundaries before hinges are placed. The 1 inch overlay reference acts as a layout guide for face dimensions, helping keep reveals consistent across a bank of doors when the same hinge is used throughout the run. With 7 holes listed for the hinge, installers gain multiple fastener points for distributing loads, which supports repeatable alignment across pairs when each hinge is positioned using the same drilling pattern.
The 3 knuckles define the pivot location and movement path, giving a predictable swing arc that can be accounted for when planning adjacent doors or nearby walls. The 5.7 lbs per pair load capacity ties directly to door construction choices, so fitting doors within this capacity contributes to doors staying true to their hinges under normal use. The named Sugatsune America brand and the specific AHA-24/SN designation allow shops to reorder the same hinge for repeat jobs or matching repairs, which helps maintain uniform door motion and appearance across additions or service work.
The Sugatsune AHA-24/SN is a Free Swinging 1 inch overlay angle hinge in the Semi-Concealed Hinges class, so it serves specialty cabinet applications where partial concealment and defined overlay are required.
The AHA-24/SN hinge has a load capacity of 5.7 lbs per pair, which suits lighter cabinet doors sized within the specified height and width ranges for dependable everyday operation.
The hinge is specified for doors up to 27-9/16 inches high and 17-3/4 inches wide, guiding door layout so panels remain within dimensions that align with the hinge design.
The AHA-24/SN hinge lists a minimum door thickness of 1-1/16 inch for recess mount and 1 inch for surface mount, so doors should meet or exceed those thicknesses for proper seating.
The 1 inch overlay description indicates the door overlaps the cabinet surface by about 1 inch, which helps installers set consistent reveals and alignment across multiple cabinet fronts.
The AHA-24/SN hinge is described as satin nickel (NKL), giving a neutral metallic finish that coordinates with many contemporary pulls and other satin nickel cabinet hardware.
The Sugatsune Free Swinging 1 inch overlay angle hinge, AHA-24/SN, combines semi-concealed styling, a satin nickel finish, and screw-on mounting with defined limits for door size, thickness, and weight. Those specific parameters support precise cabinet layouts where 1 inch overlay doors, within the stated height and width, need controlled movement on lighter panels. For projects that match these dimensions and design goals, this Sugatsune specialty hinge offers a clear, spec-based option for consistent overlay and dependable swing on smaller cabinet doors.