Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Sugatsune free swinging overlay glass door hinge defines this GH-450G/GA hinge as a screw-on solution for mounting glass doors onto a frame, giving you a controlled overlay fit on showcase or cabinet fronts where a framed structure surrounds the glass. The hinge is described as free swinging and with no catch, so the door moves smoothly without an integrated stop or detent, which suits display cases that rely on separate hardware for closing or latching. Its wrap glass door hinge design for glass frame use means it wraps around and supports a glass door from the frame side, helping you mount glass panels without drilling through the glass face. The gold finish noted in the description gives the hinge a warm metallic look, helping it blend into showcase designs where visible hardware needs to match other gold-tone components.
The screw-on description of this GH-450G/GA hinge indicates that it attaches to the frame with screws, so you can mount the hinge plate firmly to wood or other suitable materials without special press-in fittings. Horizontal adjustability of plus or minus 1.2 mm lets you shift the door plane along the frame after fastening, which helps align adjacent doors and control the gap between door and frame on showcases. The stated spacer use for 5-8 mm glass thickness ties the fit directly to the glass panel size, so you can configure the hinge for 3/16, 1/4, or 5/16 inch glass while keeping the edge location consistent relative to the frame. Its overlay glass door hinge identity means the door overlays the frame edge when closed, which affects how you size and position the frame opening around the glass.
The SAP description notes a wrap glass door hinge with no catch, so this GH-450G/GA model suits installations where a glass door must swing freely, such as retail or museum showcases that depend on separate catches or locks. The web description calls it suitable for showcases, directly pointing it to display cabinets or framed glass cases where users open and close doors frequently for access. Its spacer arrangement is specified to accommodate glass thickness from 5-8 mm, meaning it fits common glass sizes used in showcase doors, so a single hinge model can serve multiple panel thicknesses in the same project type. The overlay function on a glass frame gives you a flush, framed presentation where the door sits over the frame edge, which is typical for display furniture seeking a clean border around the viewing area.
The applicable glass door size per pair states a width of 600 mm, a height of 1,200 mm, and a weight of 15 kg, so using this hinge pair within those ranges helps keep movement and support in line with its described capability. The specific thickness guidance lists 3/16 inch glass using 3 spacers, 1/4 inch glass using 2 spacers, and 5/16 inch glass needing no spacer, which ties each thickness to a defined spacer setup so the glass edge sits correctly for clamping and alignment. The plus or minus 1.2 mm horizontal adjustment gives you a measurable tuning range, helping reduce rework by allowing small shifts instead of repositioning the screw-on hinge plate. The gold finish, specified in both the product name and SAP description, establishes a consistent appearance across multiple hinges on a run of doors, which matters in showcase lines where matching visible hardware supports a uniform presentation.
The GH-450G/GA hinge uses a spacer arrangement specified for 5-8 mm glass, so it is set up for glass doors within that thickness range on framed showcases.
The GH-450G/GA hinge uses 3 spacers for 3/16 inch glass, 2 spacers for 1/4 inch glass, and no spacer for 5/16 inch glass, keeping the glass edge position consistent.
The GH-450G/GA hinge pair is described for glass doors up to 600 mm wide, 1,200 mm high, and 15 kg in weight, aligning hinge capacity with typical showcase door dimensions.
The GH-450G/GA hinge offers horizontal adjustment of plus or minus 1.2 mm, allowing small side-to-side shifts that help align door gaps and reveals after mounting.
The GH-450G/GA hinge is described as free swinging with no catch, so the door moves open and closed without a built-in latching point, suiting cases with separate closing hardware.
The GH-450G/GA hinge is stated as for glass frame use and suitable for showcases, aligning it with framed display cabinets and similar glass-fronted casework.
The GH-450G/GA Sugatsune free swinging overlay glass door hinge pairs glass frame use with defined door size and thickness ranges, so it targets framed showcase applications where panel dimensions follow those limits. Its screw-on mounting and horizontal adjustment of plus or minus 1.2 mm give a clear path to fastening and then fine-tuning door position in the frame, which supports consistent gaps across multiple doors. Spacer guidance for 3/16, 1/4, and 5/16 inch glass thickness ties each setup directly to the 5-8 mm range, letting you align your glass choice with the hinge configuration for repeatable overlay results on display cabinetry.