Sugatsune overlay glass door hinge gives a free swinging action for glass doors on showcases, so doors move smoothly while staying properly aligned over the cabinet opening. This hinge is designed for overlay use, meaning the glass door sits over the case edge, which suits typical display and showcase layouts where a clean face with no inset reveal is preferred. The hinge is suitable for showcases, so it fits well into retail, display, and cabinet applications that use glass fronts to present contents while controlling door movement in a predictable arc. The screw-on mounting style lets installers fasten the hinge securely, which supports repeatable placement along multiple doors. An integrated catch in the hinge helps hold the door closed, so showcases stay shut without separate catch hardware. The chrome finish provides a bright, neutral look that coordinates with common glass and metal display components.
This Sugatsune screw-on chrome hinge is designed so the installer fastens it with screws, giving a solid mechanical connection to the case and glass mounting components. Vertical adjustment of plus or minus 1 mm allows the door to be shifted slightly up or down after installation, which is useful when multiple doors share a common top line. Horizontal adjustment of plus or minus 1.2 mm lets the door move slightly left or right, helping to tighten or open gaps so reveals look consistent. The overlay use design positions the glass over the cabinet front, which matches many standard showcase constructions where face frames or case edges stay hidden behind the glass.
This Sugatsune Free Swinging Overlay Glass Door Hinge, GH-456C/CR, is suitable for showcases, so it lines up with display cabinets, retail cases, and glass-front furniture where clear visibility is a priority. The hinge is a wrap angle glass door hinge with catch, so it supports glass doors that swing freely while also having a catch function to hold the door closed at rest. The spacer system is designed to accommodate different glass thickness from 5 to 8 mm, covering 3/16 inch, 1/4 inch, and 5/16 inch glass ranges typically used in showcases. For 3/16 inch glass the hinge uses 3 spacers, for 1/4 inch glass it uses 2 spacers, and for 5/16 inch glass the spacer is not required, so installers can match the hinge setup to the glass thickness in a repeatable way across a run of doors. The applicable glass door size per pair is a width of 600 mm, height of 1,200 mm, and weight of 15 kg, which fits many single-door showcase modules.
The mounting position adjustability of vertically plus or minus 1 mm and horizontally plus or minus 1.2 mm allows fine-tuning after the hinges are fixed, which reduces the need to reposition screw-on mounting points when reveals are slightly off. That adjustment range helps bring door tops into a straight line and balance side gaps, so doors present evenly across a bank of showcases. The spacer system covering glass thickness from 5 to 8 mm means a single hinge model, GH-456C/CR, can be applied to different glass sizes, helping standardize hardware choices on a project. Using 3 spacers for 3/16 inch glass, 2 spacers for 1/4 inch glass, or no spacer for 5/16 inch glass keeps the glass properly located relative to the hinge body, so the door swings on the intended pivot line. The free swinging function lets the door move without spring closing force, which works well for display situations where doors may stay open during stocking or service.
The Sugatsune overlay glass door hinge is for overlay glass doors on showcases, so the glass overlays the case front and suits display and cabinet applications using glass fronts.
The GH-456C/CR hinge offers mounting position adjustment vertically plus or minus 1 mm and horizontally plus or minus 1.2 mm, so installers can fine-tune reveals after the hinge is mounted.
This hinge uses a spacer system to accommodate glass thickness from 5 to 8 mm, covering 3/16 inch, 1/4 inch, and 5/16 inch glass used in many showcase doors.
The Sugatsune GH-456C/CR is a screw-on hinge, so it fastens with screws to provide a secure attachment point on the cabinet and door components.
A pair of these hinges is applicable for a glass door up to 600 mm wide, 1,200 mm high, and 15 kg in weight, matching many standard showcase door sizes.
This hinge is a chrome wrap angle glass door hinge with catch, giving a bright metal look and a built-in catch function for closed-door holding on showcases.
The Sugatsune overlay glass door hinge, GH-456C/CR, combines free swinging overlay function with a catch, spacer system for 5 to 8 mm glass, and fine vertical and horizontal adjustment. These details align with real showcase builds where glass thickness, door size, and reveal consistency vary from case to case. For projects using overlay glass doors up to 600 mm wide, 1,200 mm high, and 15 kg, this chrome screw-on hinge offers a focused option for showcase and display installations.