Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Sugatsune J95 series hinge brings a Black Nickel finish to a free-swinging 5/8 inch overlay concealed hinge sized for thick doors on both face-frame and frameless cabinets. It screws on directly, with no clip-on plate required, and stays fully hidden when the door closes.
The J95 is engineered for doors thicker than the standard 16 to 22mm range. Its 40mm cup, bored to a 48mm bore pattern, seats in doors up to 1-3/16 inch thick where a standard 35mm cup would not seat correctly. The 93 degree opening is not a shortcoming: at that door thickness, 93 degrees is the angle that lets the door clear the cabinet front cleanly on every swing. The half crank arm positions the door at a 5/8 inch overlay, so it covers the cabinet side by that amount, the geometry used when two doors share a center partition or when a partial-overlay look is specified.
Because the motion is free-swinging, this hinge is a natural pairing with push-to-open systems: the door releases at a press and stays open where positioned, with no spring pulling it back. It is also the correct choice for any application where a soft-close or self-close mechanism is handled separately, outside the hinge itself. A separate base plate is required and sold separately; match a plate from the Sugatsune J95 series to your cabinet type.
The hinge body is steel finished in Black Nickel, a dark tone that sits between matte black and satin nickel. Where the hinge is visible during installation or in an open-front application, the Black Nickel reads as a deliberate hardware choice rather than a utility component. It also coordinates naturally with dark pulls, knobs, and other Black Nickel hardware across the same run of cabinets, keeping the finish story consistent from hinges to handles.
Reach for the J95 in Black Nickel when the project combines thick solid-wood or heavy panel doors with a partial-overlay layout, and the hardware finish across the cabinet runs dark. It suits custom shops building thick-door frameless boxes, designers specifying handle-less kitchens with push-to-open, and contractors hanging doors on face-frame cabinets where the stile and door construction call for the wider cup. For doors in the standard 16 to 22mm range, a standard 35mm cup hinge is the correct choice. For applications that need built-in soft-close or self-close, choose a J95 variant with the appropriate motion technology.
The 93 degree opening is by design for thick-door applications. A thicker door needs a reduced swing to clear the cabinet face without binding. That angle gives full practical access at the door thickness this hinge is built for.
No. This hinge requires a separate base plate that mounts to the cabinet, sold separately. Use a plate from the Sugatsune J95 series matched to your cabinet construction. Plates from other brands will not connect to this hinge.
A free-swinging hinge has no spring and no damper. The door stays open wherever you leave it and does not pull itself shut. It pairs well with push-to-open hardware, and it also works where a separate soft-close adapter is installed outside the hinge. Without a catch or push-to-open mechanism, the door will need something to hold it closed.
No. Black Nickel is a distinct finish with a dark metallic quality that sits between a true matte black and a satin nickel. It reads darker than nickel but carries more sheen than a flat black. Coordinate with other Black Nickel hardware for a consistent look across the cabinet.
The J95 in Black Nickel is the hinge for thick-door, partial-overlay work where the hardware finish matters as much as the engineering behind it.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  SLJ95-P6T-BN Mfr# J95-P6T-BN | Sugatsune J95 Hinge Mounting Plate Black Nickel, - J95-P6T-BN |
