Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Sugatsune J95 Series concealed hinge brings a durable black nickel finish to demanding overlay applications, with self-close built in and the structural muscle to carry doors up to 55 lbs per pair on both face-frame and frameless cabinets.
The J95 is built around a 40mm cup, a larger bore than the 35mm standard, and a maximum door thickness of 1-3/16 inches. That geometry suits doors that are heavier or slightly thicker than what a standard concealed hinge is engineered for. The half crank sets the door at a 5/8 inch overlay, the configuration for partial-overlay doors and pairs of doors meeting on a center partition. Opening travel is 93 degrees, the correct swing for this class of thicker, heavier door where the reduced angle keeps the door clear without binding. A separate base plate, matched to this brand and series, is required and sold separately.
The hinge body is steel finished in Black Nickel, a dark, refined tone that pairs naturally with matte black pulls, dark bin pulls, and charcoal or graphite cabinet hardware families. Black Nickel sits visually between a warm black and a cooler dark chrome, making it a versatile finish for contemporary and transitional interiors where standard nickel reads too light. The 48mm boring pattern is specific to the J95 series, so confirm existing door bores before ordering replacements.
Cabinet shops and installers working on higher-end residential or commercial projects where hardware finish consistency matters will find the Black Nickel finish useful: it keeps the hinge itself from breaking the design when doors are open. It suits face-frame and frameless boxes alike, with the screw-on mount that does not depend on pre-bored 5mm system holes in the cabinet side. Designers specifying a dark hardware palette across a kitchen or bath can use this hinge to extend that finish to the concealed hinge without a finish mismatch. For lighter doors or standard 35mm cup bores, a standard J95 series variant is the more appropriate match.
Yes. This hinge uses a 40mm cup, not the 35mm standard. The door needs a 40mm bore to seat it correctly. If the door is already bored at 35mm, this hinge will not fit without re-boring.
No. This is a self-close hinge: a spring pulls the door shut automatically over the last few degrees. It does not cushion or slow the close the way a soft-close damper does. The door closes on its own but makes contact at closing speed.
No. A base plate is required to complete the installation and is sold separately. Use a plate matched to the Sugatsune J95 series, as plates are brand and series specific and will not interchange with other brands.
The 93 degree opening is intentional for this class of heavier, thicker door. It provides the clearance the door needs without over-rotating and stressing the hinge under load. It is the correct engineering for the application, not a constraint to work around.
Specify the J95 in Black Nickel when the project calls for a concealed hinge that carries real door weight, closes reliably on its own, and keeps a coordinated dark finish from the hardware through to the hinge itself.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  SLJ95-P6T-BN Mfr# J95-P6T-BN | Sugatsune J95 Hinge Mounting Plate Black Nickel, - J95-P6T-BN |
