Sugatsune glass bracket XL-GC05-L-C is a screw-on chrome glass bracket designed for use with the GC04 hinge, giving glass door projects a defined mounting point for the hinge. This left-hand bracket works with a glass top plate thickness of 8 mm, or 5/16 inch, so glass selection and machining can be planned to that dimension. The 26 lb supported weight limit, measured with the handle weight included, helps size smaller cabinet or display doors where this hinge system is appropriate. As a glass door hinge component from Sugatsune America, this bracket fits into glass door hinge layouts that rely on precise glass edge mounting. The chrome finish presents a clean hardware look that works in many cabinet environments. Sold in both broken and full box quantities through Wurth Baer Supply, this bracket can be ordered for single-door work or for larger runs where a discount on full box orders is useful.
The requirement for an 8 mm (5/16 inch) glass top plate thickness means the Sugatsune America XL-GC05-L-C bracket and GC04 hinge assembly are geared toward this glass size, supporting repeatable fit when multiple doors are produced from the same specification. Because the supported weight limit is 26 lb with the handle weight accounted for, door dimensions and hardware choices can be aligned to stay within that bracket and hinge capacity. The screw-on chrome design described in the product name indicates that this bracket is fastened mechanically rather than clamped or bonded, giving installers a defined attachment method to the glass top plate area specified in the note.
The SAP description stating that this is a glass bracket for the GC04 hinge ties the XL-GC05-L-C directly to hinge layouts that use the GC04 model, so planners can match hinge and bracket by part reference. Its role as a glass door hinge component within the Glass Door Hinges category positions it for cabinet or display doors that use a glass top plate at 8 mm, or 5/16 inch, thickness. The left-hand reference in the SAP description helps lay out hinge swing direction on glass doors where hand-specific components matter. With a 26 lb supported weight limit, including the handle, this bracket fits projects where the combined door and handle mass is within that range, such as smaller display or cabinet fronts. The chrome finish lets the bracket visually align with chrome hardware across the same project.
The explicit note that the glass top plate must be 8 mm (5/16 inch) gives a firm design dimension, so glass fabricators can cut and edge panels to a known standard that suits the XL-GC05-L-C bracket. Because the supported weight limit of 26 lb already factors in the handle, the builder can calculate door panel weight without adding handle allowance, simplifying layout choices within the intended range of this glass door hinge system. The screw-on wording in the product name signals a bracket that mounts using fasteners rather than adhesives, supporting precise hinge positioning relative to the 8 mm glass edge. Being specified as a glass bracket for the GC04 hinge creates a clear pairing between hinge and bracket, streamlining part selection when repeating the same configuration across multiple cabinets. The chrome finish, noted in both the SAP description and product name, sets the surface appearance expectations for projects where exposed hinge hardware is part of the design.
The Sugatsune XL-GC05-L-C glass bracket is specified for a glass top plate thickness of 8 mm, or 5/16 inch, so glass selection and fabrication can follow that single standard size.
The XL-GC05-L-C bracket supports up to 26 lb, with the handle weight already counted, which helps size glass doors and hardware so the assembly stays within that limit.
The SAP description identifies this part as a glass bracket for the GC04 hinge, so it is tied directly to hinge layouts that specify the GC04 model.
The SAP description notes this glass bracket as LH, indicating a left-hand orientation that supports planning hinge swing direction on glass doors.
The product name and SAP description describe this glass bracket as chrome, so it presents a bright metal finish matching other chrome hardware.
The product name calls this a screw-on chrome glass bracket, indicating that it fastens using screws, giving a defined mechanical attachment method.
The Sugatsune Free Swinging Glass Bracket XL-GC05-L-C brings a screw-on chrome mounting point that is keyed to 8 mm (5/16 inch) glass, letting GC04 hinge layouts be repeated with consistent results. With a 26 lb supported weight limit that factors in the handle, it suits smaller glass door projects where staying inside that capacity is part of the design. Left-hand orientation and chrome finish details in the description help align swing direction and appearance across a run of cabinets. Ordered through Wurth Baer Supply in broken or full box quantities, this glass door hinge component can be matched to both one-off installations and larger jobs.