Nova Pro Scala H90 Drawer Member Set with 154lb Capacity, Full Extension, Soft-Closing, 3-1/2", Stone, 16

Nova Pro Scala H90 Drawer Member Set Purpose

Nova Pro Scala H90 drawer member set defines a practical standard drawer setup that covers general cabinet applications where a consistent system streamlines builds. This set belongs to the Grass Nova Pro Scala drawer system, so it slots into an established construction platform on the shop floor and in the field. The drawer member set is specified at 3-1/2 inch height, giving a known side profile that helps plan drawer box construction and front layout. A 16 inch (400mm) length provides a familiar depth often used in cabinet runs, which simplifies planning cabinet interior clearances. The drawer is described as a practical standard drawer for all applications, so it supports a broad range of everyday storage jobs without changing hardware families. The system is compatible with Tipmatic Soft-close, so it can work where mechanical opening and soft closing are both required in the same drawer line.

Key Functional Details That Support Drawer Builds

• The drawer member set supports a 154 lb (70kg) dynamic load, so heavier contents can be handled inside the rated capacity while maintaining performance during repeated opening cycles.
• Full extension functionality brings the drawer fully out of the cabinet, so contents are accessible from front to back without reaching deep into the cabinet interior during daily use.
• The integrated height and side adjustment in the system allow fine tuning of drawer front alignment, so reveals can be dialed in after installation without rebuilding or drilling new locations.
• Soft-close damping is built into the drawer system, so closing motion is controlled at the end of travel and reduces slamming impact on the drawer, cabinet, and installed fronts.
• Fully synchronized slide technology keeps both drawer members moving together, so the drawer tracks smoothly with reduced racking when loads are spread unevenly across the drawer width.

Installation And Adjustment Details For This Slide Set

The Nova Pro Scala H90 drawer member set uses integrated height and side adjustment, so installers can shift the drawer front vertically and laterally after mounting to achieve even gaps. This adjustability supports cleaner sight lines across a bank of drawers without pulling the system apart. Full extension action uses fully synchronized slide technology that guides both sides in unison, so the drawer can be fitted squarely and still move smoothly when loaded. The soft-close damping system operates at the end of travel, so the drawer can be pushed shut at a normal speed and then controlled into the final position. The system is compatible with Tipmatic Soft-close, so projects that specify mechanical push-to-open with soft closing can stay within the same Grass Nova Pro Scala drawer system.

Using This Grass Nova Pro Scala Drawer System

Where This Drawer Member Set Fits Best

This Nova Pro Scala H90 drawer member set is described as the practical standard drawer for all applications, so it fits well into general-purpose cabinetry where a single system is preferred across multiple cabinet zones. The 16 inch (400mm) length matches common cabinet depths, so it integrates into base cabinets, utility cabinets, and similar carcasses that share that interior dimension. The 3-1/2 inch height defines a drawer side level suited to typical mid-height storage drawers, which helps when mapping front sizes and stacking multiple drawers in a cabinet. The 154 lb dynamic capacity supports heavier contents such as tools, cookware, or dense hardware assortments within the rated limits, so the same system can be used where loads vary from light to substantial.

How System Features Support Consistent Results

The fully synchronized slide technology in this Grass Nova Pro Scala drawer system holds both slide members in step, so the drawer tracks straight even when weight is biased to one side, which reduces binding and rework. Integrated height and side adjustment give installers a controlled way to correct small dimensional variations at the jobsite, so drawer fronts can be tuned for even margins across a run. The soft-close damping system manages the last part of the closing motion, so fronts settle gently against the cabinet, which supports a more controlled feel over time. Compatibility with Tipmatic Soft-close means the same drawer member set can participate in projects that specify a push-to-open and soft-close combination, so hardware selections stay within one coordinated system. The 16 inch length and 3-1/2 inch height remain constant in this set, so builders can standardize cut lists and machining patterns around those fixed dimensions.

Common Questions About This Nova Pro Scala Set

Selecting This Nova Pro Scala Set For Your Project

The Nova Pro Scala H90 drawer member set with 154 lb capacity, full extension, and soft-closing performance offers a defined 16 inch length and 3-1/2 inch height for standard drawer construction. Integrated height and side adjustment, fully synchronized slide technology, and compatibility with Tipmatic Soft-close align this Grass Nova Pro Scala drawer system with projects that rely on controlled motion and repeatable alignment. For builds centered around the Grass America Nova Pro Scala platform, this drawer member set provides a consistent, application-ready option.