Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is the Nova Pro P904 cabinet member from Grass's Nova Pro Scala drawer system, sized at 16 inches (400mm) and sold in bulk quantity. It is the cabinet-side runner that anchors a complete Nova Pro Scala drawer at the rear of the cabinet, pairing with the corresponding drawer members and front fixings to form a working drawer slide assembly.
The cabinet member is the runner that mounts to the inside wall of the cabinet box. In the Nova Pro Scala system, each drawer opening uses a pair of cabinet members — one per side — working with the drawer members that attach to the drawer box sides and the front fixings that hold the drawer front. This 16 inch member suits cabinet depths found in upper kitchen cabinets, bathroom vanities, and furniture pieces where a longer nominal length would run out of space. Full extension means the drawer clears the cabinet face completely, so nothing hides at the back of even a shallow box.
The Metallic finish on this cabinet member coordinates with Nova Pro Scala's steel side profiles and interior hardware. Nova Pro Scala is a double-walled metal drawer system, and the cabinet runner is engineered to match that platform's tolerances and closing geometry. The integrated soft-close damper is part of this runner, not a retrofit clip — it is calibrated to the system's drawer weight range and delivers consistent, quiet closes across daily use. At 88 lb capacity for this length, the runner handles loaded kitchen drawers without strain.
Cabinet shops running Nova Pro Scala as their standard system reach for this 16 inch member when a job calls for shallower drawers — upper cabinet roll-outs, bathroom drawer banks, home office furniture, or storage pieces where full depth is not available. The bulk format makes it practical for shops sourcing components drawer-by-drawer across a project rather than buying complete sets. Designers specifying Nova Pro Scala for fitted interiors will find the 16 inch nominal length the right call when cabinet depth runs closer to 18 inches than 21 or 24. This cabinet member is Nova Pro Scala-specific; it does not pair with other Grass drawer systems or any other brand's components.
This listing is for the cabinet member — the runner that mounts in the cabinet. Check the sold-as quantity on the listing; for a complete drawer opening you need two cabinet members (one per side) plus the matching drawer members and front fixings for your Nova Pro Scala setup.
The Nova Pro Scala 400mm nominal length targets cabinet depths in the 18 inch range. Grass publishes the exact minimum cabinet depth for each nominal length in the Nova Pro Scala installation guide — confirm the depth against your cabinet box before ordering.
No. Nova Pro Scala components are engineered for that system. They do not interchange with earlier Nova Pro generations or with other Grass families such as Dynapro or Elite Plus.
Nova Pro Scala offers a combined Tipmatic Soft-close unit that delivers both push-to-open and damped closing in one mechanism. A standard soft-close cabinet member like this one is not the combined unit — if your project needs handle-less push-to-open fronts with soft-close, specify the Tipmatic Soft-close version instead.
Having the 16 inch Nova Pro Scala cabinet member in hand when shallow drawers are on the cut list means the build stays on schedule — no substitutions, no waiting on a special order to come in for the one bank of upper-cabinet roll-outs on the job.
Sold In: 10 Set
