Stainless Steel Sink Grid Protection For Karran

Stainless Steel Sink Grid is the Karran GR-6016 bottom grid built for the small bowl of QT-811 and QU-811 sinks, so it covers the working base of that bowl and keeps metal contact off the sink surface during daily use. Constructed of solid T304 stainless steel, this grid resists corrosion, which keeps the wire structure stable and reduces the risk of staining at contact points over time. The stainless construction also gives a rigid platform for pots and dishes, so loads sit on the grid instead of bearing directly on the sink floor. Protective bumpers along the perimeter create a cushioned barrier between the grid and the sink walls, which reduces impact marks when heavier items are set down or shifted. Rubber feet elevate the grid above the sink bottom, which allows water to easily drain underneath and move debris toward the drain while dishes rest on top.

Key Sink Grid Details That Support Daily Work

• Constructed of solid T304 stainless steel, this grid resists corrosion, so it keeps its structure and appearance in a wet sink environment where standing water and detergents are present.
• Protective bumpers along the contact edges separate the grid from the sink surface, which helps prevent scuffs when pots or dishes slide against the sides of the bowl.
• Rubber feet elevate the grid slightly above the sink bottom, which lets water flow underneath while dishes sit on the grid and helps reduce scratching on the sink floor.
• The grid fits the small bowl of Karran QT-811 and QU-811 sinks, so it follows that bowl shape and keeps the usable base area covered during typical dishwashing tasks.
• The grid design allows water to easily drain through the wire spacing, so rinsing and draining can continue without lifting dishes off the support surface.

Installation And Fit For Karran QT-811 QU-811 Bowls

This Karran GR-6016 stainless steel bottom grid is sized to fit the small bowl of QT-811 and QU-811 sinks, so it drops directly into that side without additional adjustments. The shaped perimeter and bumpers follow the bowl contour, which helps the grid sit in a stable position during loading and unloading. Rubber feet support the grid slightly off the sink floor, so once it is in place it stays elevated while still allowing normal access to the drain opening. Because the grid sits freely on its bumpers and feet, it can be lifted out when access to the bare sink surface is needed and then set back in position for regular dishwashing work.

How This Karran Sink Grid Works In Service

Sink Bottom Grid Use In QT-811 And QU-811

The GR-6016 stainless steel bottom grid fits the small bowl of Karran QT-811 and QU-811 sinks, so it is used wherever that secondary bowl handles prep or cleanup tasks. By covering the working base of the small bowl, the grid takes the contact from pots, pans, and dishes instead of the sink floor, which helps maintain the brand new look of the sink over long-term use. The wire layout lets water easily drain through the grid, so rinsing vegetables or washing utensils can continue while items rest above any residual water. Protective bumpers positioned around the grid edge interface with the sink walls, which keeps the metal frame from striking or rubbing directly against the sink surface when items are moved. Rubber feet locate the grid above the base of the bowl, so debris and water move underneath toward the drain while dishes remain supported.

Details That Support Long-Term Sink Appearance

Constructed of solid T304 stainless steel, this Karran sink grid resists corrosion in everyday kitchen sink conditions, so the frame is designed to stay intact under constant exposure to water and dishwashing detergents. That corrosion resistance helps prevent rust spots at contact points, which supports a cleaner look around the bottom of the sink. Protective bumpers along the grid perimeter create a non-metal contact surface on the sink walls, so sliding a heavy pot against the side of the bowl is less likely to leave marks. Rubber feet under the wire structure keep the grid lifted from the sink floor, which reduces direct abrasion on the base when dishes are set down or shifted. The grid is easy to clean with liquid soap and water, so buildup on the wires can be removed during normal sink cleaning routines without special processes. A 1-year limited warranty from Karran backs the product, which provides defined coverage for the grid over its initial period in service.

Common Questions About This Karran Sink Grid

Selecting This Grid For QT-811 And QU-811 Use

The Karran GR-6016 stainless steel bottom grid is built specifically for the small bowl of QT-811 and QU-811 sinks, so it aligns with that application when protecting the bowl surface from scratches and scuffs. Solid T304 stainless steel construction resists corrosion in wet kitchen conditions, so the grid stays functional under daily dishwashing tasks. Protective bumpers and rubber feet separate the frame from the sink surface, so contact points stay cushioned while water continues to drain easily underneath. For projects using these Karran models, this grid provides a defined way to support pots and dishes while maintaining the look of the small bowl over time.