Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
2881 glass shelf support is a Sugatsune America zinc shelf support in matte chrome that holds glass shelves in cabinet, closet, or display layouts where a clean metal support is needed. The support uses zinc construction with a matte chrome finish, which provides a metal bearing surface for the glass while keeping a neutral, project-friendly look around hardware lines and hardware intersections. The unit is designed for tempered glass, so it pairs with glass that is already suited to typical shelving loads in commercial and residential interiors. Its role in the assembly is to carry the glass along the wall or casework, so the shelf can take weight without transferring load to the glass edges in a way that would interfere with standard woodworking layouts.
The 100mm W zinc shelf support is specified for a shelf support distance up to 19-11/16 inches, so layout begins by holding pairs within that spacing to stay inside the rated load capacity. When the glass depth is no more than 11-13/16 inches, the support can carry 20 kg, or 44 lbs per pair at the center, so installers can set product loading expectations for each shelf based on that combination of span and depth. Because the support is used with 6-10mm glass, the clamping or resting interface is tailored to that range, which helps the glass seat properly without relying on improvised shims or off-range material that would change how the shelf bears. Working within those three limits - glass thickness, glass depth, and support spacing - keeps the hardware and glass working as a coordinated shelf system.
This Sugatsune America 2881 glass shelf support is suited to projects using 6-10mm tempered glass shelves in cabinets, closets, or wall units where metal supports in matte chrome align with the rest of the hardware set. The 100mm wide zinc body provides a defined bearing area under the glass, which helps distribute load along the mounting surface when shelves are carrying up to 20 kg per pair at the center. With glass depths up to 11-13/16 inches supported, the hardware fits many display, retail, or residential shelf depths that stay inside that range. The specified shelf support distance of 19-11/16 inches lets planners position pairs along the wall or case interior so each shelf has predictable performance across its width under typical stored items.
The 6-10mm glass range means this tempered glass shelf support grips or carries standard glass thicknesses without overhang gaps that would change load paths, so the shelf sits consistently from one bay to the next. Keeping glass depth within 11-13/16 inches ensures the 20 kg, 44 lbs per pair capacity applies to practical shelf sizes, which matters when spacing supports to match product rows or display groupings. The 19-11/16 inch maximum distance between supports defines how far apart pairs can be placed along the wall before deflection and loading move beyond the stated rating, so drafters can translate that number directly into drawing dimensions. The zinc construction with a matte chrome finish keeps the support in a familiar hardware material and finish family, which simplifies matching it to other visible components in the same installation.
The 2881 glass shelf support works with 6-10mm glass, so any shelf in that thickness range will mate to the support interface as specified.
The 2881 glass shelf support carries 20 kg, or 44 lbs per pair at the center of the glass, which defines the usable loading when planning shelf contents.
The glass shelf support distance is rated up to 19-11/16 inches, or 500 mm, giving a clear spacing limit when laying out multiple support pairs along a run.
The 2881 glass shelf support works with glass depths up to 11-13/16 inches, or 300 mm, so shelves within that depth stay inside the stated performance envelope.
Tempered glass is recommended because the support is intended to work with glass engineered for shelving loads and impact conditions typical of storage and display use.
The SAP description lists a 100mm W zinc shelf support in matte chrome, so the hardware presents a zinc body with a matte chrome surface in the installation.
The 2881 glass shelf support from Sugatsune America brings a 20 kg per pair rating, a 6-10mm glass range, and defined 500 mm spacing and 300 mm depth limits to glass shelf layouts. Those specific numbers convert directly into drawing dimensions for shelving in cabinets, closets, and wall systems, which streamlines planning and repetition across similar projects. For jobs calling for a 100mm W zinc support in matte chrome, this part number ties the visual finish and load criteria together so glass shelves and surrounding woodworking can be detailed as a coordinated system.