Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
CORNERSTONE Swing Scalea 2 Shelf Blind Corner Kit turns a blind corner cabinet with a 21 inch opening into usable storage by swinging both shelves out, so stored items move into full view instead of being buried in the back. This Vauth-Sagel blind corner organizer is built around a slide mechanism with soft-close, which controls the motion of the shelves so they travel smoothly and return quietly, helping protect both the cabinet and the stored contents. The kit uses two trays, so the vertical space inside the blind corner can be used in layers instead of as one hard-to-reach void. Each shelf is rated for a 40 lb load capacity, allowing heavier kitchen items to be stored without overloading the trays. The non-handed design means the same unit works in either left or right blind corner orientations on the job.
The blind corner pull-out kit is specified for a cabinet with a 21 inch opening, which defines where this organizer fits and helps align it to standard blind base cabinet widths on layouts. The minimum installation depth of 19.3125 inches means the cabinet interior must accommodate that distance from the front to the back, so the slide mechanism can travel without obstruction. The installation height range from 25.6 to 27.2 inches allows the support tube to be positioned within this vertical band, which lets installers work around existing hinges or interior structures. The design where only the support tube needs to be mounted simplifies layout, because the slide mechanism and trays relate back to that single reference part.
This Vauth-Sagel blind corner organizer is classified as a blind corner pull-out in the Kitchen & Bath Cabinet Accessories category, so it is suited to blind corner base cabinets where access to the back area is otherwise limited. The product falls under Blind Corner Organizers, which identifies its role as a system that brings stored items forward out of the blind zone. The 2-tray configuration lets both upper and lower storage levels move out on the slide mechanism, improving reach to small items that might otherwise be placed at the rear. The walnut tray bottom finish option supports use in kitchens or baths where a warm interior is desired, while the silver frame and post hardware finishes blend with most cabinet hardware tones.
The soft-close slide mechanism manages the trays movement during every cycle, so the shelves pull out and return along the same path without slamming, which supports consistent operation over repeated daily use. The non-handed installation means the same CORNERSTONE Swing Scalea 2 Shelf Blind Corner Kit can be used for either left or right blind corners, which simplifies stocking and reduces the chance of bringing the wrong hand to the job. The easy assembly configuration, where only the support tube must be mounted, keeps the critical alignment work focused on setting that tube plumb and in the correct height range of 25.6 to 27.2 inches. Once the support tube is fixed within that band and the minimum depth of 19.3125 inches is present, the slide mechanism and trays are positioned from that reference, helping reduce layout time from one cabinet to the next.
The CORNERSTONE Swing Scalea 2 Shelf Blind Corner Kit is specified for a 21 inch cabinet opening, so it matches blind corner base cabinets designed around that front opening width.
Each shelf in the CORNERSTONE Swing Scalea 2 Shelf Blind Corner Kit has a 40 lb load capacity, allowing heavier cookware or pantry items to be stored on the pull-out trays.
The blind corner organizer requires a minimum installation depth of 19.3125 inches, so the slide mechanism and trays have sufficient room to travel inside the cabinet.
The blind corner kit is described as unhanded, so one model can be used on either left or right blind corner cabinet configurations.
The installation height for this blind corner organizer is specified from 25.6 to 27.2 inches, guiding where the support tube is mounted within the cabinet interior.
The slide mechanism with soft-close controls the trays return motion, so the shelves close gently, helping reduce noise and stress on the cabinet structure.
The CORNERSTONE Swing Scalea 2 Shelf Blind Corner Kit from Vauth-Sagel offers a 2-tray blind corner organizer with 40 lb per shelf capacity, a 21 inch opening requirement, and a minimum installation depth of 19.3125 inches. The unhanded, easy-assembly design, with only the support tube needing mounting within the 25.6 to 27.2 inch height range, keeps installation straightforward for repeated projects. The silver frame and post hardware finishes, along with the walnut tray bottom finish option, support use in a range of kitchen or bath designs. Use these verified dimensions and details to match this blind corner pull-out to cabinets that meet the specified opening, depth, and height requirements.
Sold In: 1 Kit
