Vauth-Sagel TAL walnut pull out pantry is a 4-shelf pull-out pantry system that organizes a tall cabinet while keeping contents accessible from the front, which matters when building efficient kitchen storage for everyday use. The system is part of the Pantry Pull-Out Organizers class, so it is designed to occupy the full cabinet height and move as one unit, which helps streamline planning around appliances and adjacent cabinets. The frame uses soft-closing slides, so the pantry closes smoothly at the end of travel, which reduces impact on the cabinet case and helps maintain alignment over time. The unit is sold as a kit, so a single product code covers the coordinated frame, motion components, and baskets for this layout, which supports repeatable ordering for multiple identical cabinets.
The TAL Walnut 4-shelf pull-out pantry has a minimum installation depth of 23 inches, so the receiving cabinet interior needs to accommodate that depth for the frame and motion hardware to travel properly. The product is specified for a cabinet height range from 57 inches to 67 inches, which defines the tall cabinet opening where the frame can be mounted and adjusted. The frame installs into upper and lower guide rails using the EasyFit self-locking system, so the frame engages the guides positively without separate fastening during initial setup. The unhanded installation configuration means the system does not depend on a dedicated left or right version, which lets the same part number be applied across different tall cabinet positions within the same project.
The TAL PANTRY PLANERO WT 4-BSKT,15X57 configuration describes a 4-basket Planero layout sized for a 15-inch wide tall cabinet at approximately 57 inches height, which fits typical narrow pantry openings in many kitchen designs. The specified 57 to 67 inch range means the frame spans and supports those cabinet heights, which helps when aligning the moving section with adjacent oven towers or refrigerator panels. The basket bottoms are finished in walnut, which provides a contrasting surface against the carbon steel gray frame and can visually separate stored items from the cabinet sides during everyday use. The system uses heavy-duty, noise-restricted roller guides, which carry the loaded frame along the full extension path while limiting operating noise in the kitchen. The full synchronized bottom runner keeps both sides of the frame moving together, which reduces side-to-side play and helps contents stay stable when moving the pantry in and out.
The PANTRY PLANERO WT 4-BSKT system uses PAM Power Assisted Movement in the pull-out direction, which supports the initial motion of the loaded pantry and reduces the effort needed to bring the contents forward. The self-closing and soft-closing functions at the end of stroke bring the pantry back into the cabinet in a controlled way, which helps prevent slamming and reduces stress on door hinges tied to the moving frame. The 3-D front adjustment mechanism allows fine-tuning of the door in three directions, which gives the installer precise control over reveal lines and alignment with nearby tall units after the cabinet run is set. Individual height adjustment on each basket means spacing can be rearranged during or after install, which is useful when storage needs or typical container heights change in the kitchen. The frame finish in carbon steel gray offers a neutral, technical appearance that coordinates with both light and dark cabinets, which supports consistent visual results across mixed finishes on a project.
The Vauth-Sagel TAL walnut pull out pantry is specified for a cabinet height from 57 inches to 67 inches, which defines the tall cabinet openings where the frame can be mounted and adjusted.
The TAL PANTRY PLANERO WT 4-BSKT,15X57 requires a minimum installation depth of 23 inches, so the cabinet interior must accommodate that depth for full pull-out travel.
The EasyFit self-locking system lets the frame lock into the upper and lower guide rails without tools, which speeds installation and aids repositioning during door and reveal adjustments.
The pantry frame offers 3-D front adjustment, providing simple door adjustment in three directions, which allows precise alignment with neighboring tall cabinet fronts after installation.
The TAL pantry system has a total load capacity of max. 256 lbs, so it can support substantial stored goods within that limit in a tall cabinet installation.
The pantry uses PAM Power Assisted Movement in the pull-out direction with self-closing and soft-closing, which supports easy opening and controlled closing during everyday kitchen use.
The Vauth-Sagel TAL walnut pull out pantry with soft-close slides gives a defined solution for 15-inch wide tall cabinets between 57 and 67 inches high, which suits many pantry and utility layouts. The Planero 4-basket configuration organizes contents on walnut basket bottoms, while the carbon steel gray frame finish ties into modern hardware schemes. With EasyFit tool-free frame engagement, 3-D front adjustment, and individual basket height adjustment, the system supports efficient installation and later fine-tuning around client storage preferences. Heavy-duty, noise-restricted roller guides, synchronized runners, and PAM Power Assisted Movement combine to handle up to 256 lbs of stored goods with controlled motion. Use this BOMTALPPL4B1557WNT pantry system when you need a tall cabinet organizer that integrates motion control, front adjustment, and flexible basket spacing in one coordinated kit.
Sold In: 1 Kit