Vauth-Sagel TAL walnut pull out pantry gives a tall cabinet a full-extension organizer with a 4-shelf frame designed for 57 to 67 inch cabinet height ranges. The TAL pantry Planero walnut 4 basket configuration uses a pull-out frame from Vauth-Sagel that belongs to the pantry pull-out organizers class, so the door opens the entire storage section in one motion. The frame finish in carbon steel gray pairs with basket bottoms that are available in carbon steel gray and walnut, so the storage section coordinates with common interior cabinet finishes on professional projects. The unhanded installation layout means the same frame works on either side of the cabinet opening, so layout changes on site do not require a different part. The system is sold in kits, so the frame, PAM mechanism, and four baskets are matched as a single solution for this configuration.
The 57 to 67 inch pull out pantry frame is sized for tall cabinet interiors in that height band, which suits common full-height pantry carcasses. A minimum installation depth of 23 inches is specified, so the cabinet interior needs that front-to-back space for the frame and basket travel. The EasyFit self-locking system sets the frame into upper and lower guide rails without tools, which simplifies mounting in a tall, deep cabinet where access can be tight. The unhanded pull out pantry frame allows mounting on either cabinet side, so hinge and adjacent appliance layouts are easier to accommodate. The total load capacity of max. 256 lbs applies to the system, which supports stocking multiple baskets with pantry goods in residential or light commercial kitchens.
This power assisted pantry pull out system is built as a tall pantry organizer, so it fits cabinets designed for 57 to 67 inch interior height. The minimum installation depth of 23 inches means it works in full-depth pantry cabinets rather than shallow units, which positions the baskets so they can extend fully on the heavy-duty, noise-restricted roller guides. The carbon steel gray frame finish and basket bottoms available in carbon steel gray and walnut match modern tall cabinet interiors, which helps the system integrate visually in kitchen and bath projects. The total load capacity of max. 256 lbs supports a fully stocked 4-basket setup, so the frame, synchronized upper and lower end stops, and full synchronized bottom runner are working within their design range even with dense contents.
The PAM Power Assisted Movement in pull-out direction works with the roller guides to initiate motion, which helps start the loaded pantry moving without jerky force on the door fronts. The self-closing and soft-closing action completes the travel gently, which reduces impact on cabinet cases and fronts over repeated cycles. The EasyFit self-locking system for tool-free installation into upper and lower guide rails sets the frame in a defined position, which supports consistent alignment of the front and predictable slide travel. The 3-D front adjustment allows simple door adjustment after the frame is mounted, which helps fine-tune reveals when walls are out of plumb or floors are out of level. Individual height adjustment for baskets allows each shelf to be repositioned as contents change, which keeps the pull out practical for different families or commercial stocking patterns without replacing components.
The Vauth-Sagel TAL walnut pull out pantry is designed for cabinet interiors in the 57 to 67 inch height range, which covers many full-height pantry cabinet designs.
The 57 to 67 inch pull out pantry requires a minimum installation depth of 23 inches, which positions the frame and baskets so they can travel fully on the guides.
The EasyFit tool free pantry installation uses a self-locking frame connection into upper and lower rails, which speeds mounting and sets consistent reference points in tall cabinets.
The TAL pantry Planero walnut 4 basket system has a total load capacity of max. 256 lbs, which supports heavy pantry contents across all four baskets.
The power assisted pantry pull out system uses PAM to help start the pull in the out direction, which reduces effort when moving a fully loaded frame.
The 3D front adjustment pantry system lets the door front be adjusted after the frame is fixed, which helps align gaps with surrounding cabinet doors.
This soft close pantry pull out organizer combines a unhanded frame, EasyFit tool-free mounting, and a 4-basket layout sized for 57 to 67 inch tall cabinets, which targets common pantry carcass dimensions. The minimum installation depth of 23 inches and max. 256 lbs load rating define its working envelope, which aligns with fully stocked kitchen pantries. Specifying the BOMTALPPL4B957WNT part from Vauth-Sagel ties the carbon steel gray frame and basket bottoms available in walnut and carbon steel gray to a single tall cabinet solution. For pantry projects needing synchronized movement, soft closing, and adjustable basket spacing, this TAL pantry Planero walnut 4 basket configuration from Wurth Baer Supply offers a defined, kit-based organizer.
Sold In: 1 Kit