Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Vauth-Sagel TAL pull out pantry organizer is a 3-shelf pull out pantry with soft-close slides designed as a pantry pull-out organizer for kitchen cabinets. The system uses an EasyFit self-locking system for tool-free installation of the frame into the upper and lower guide rails, which speeds cabinet assembly and helps installers set the unit without extra fastening steps. The pull-out uses heavy-duty, noise-restricted roller guides, so the pantry moves smoothly while keeping operation quieter in everyday kitchen use. A minimum installation depth of 23 inches is specified, so the cabinet interior can be sized confidently during planning and layout. The frame finish is carbon steel gray, which presents a neutral, modern appearance that coordinates easily with typical cabinet interiors. Basket bottoms are available in carbon steel gray, walnut, and maple finishes, allowing the visual look to be matched to different cabinet and shelf schemes.
This TAL pantry pull-out organizer is specified as unhanded installation, so the same hardware setup serves either orientation in a cabinet run. The EasyFit self-locking system provides tool-free installation of the frame into the upper and lower guide rails, which helps installers seat the frame quickly once rails are positioned. A 3-D front adjustment is built into the system, allowing simple door adjustment in three directions so the pantry front can be aligned to surrounding fronts after mounting. Individual height adjustment for baskets is provided, so each basket level can be set on the frame to suit container heights or specific storage zones. The minimum installation depth of 23 inches guides cabinet depth decisions so the pull-out frame and slides operate within the stated range.
The TAL pantry Scalea CS 3-basket system is described as a pantry pull-out organizer, so it is suited to tall pantry cabinet applications needing front-attached pull-out storage. The unit is categorized under Kitchen & Bath Cabinet Accessories and Pantry Cabinet Products and Shelves, linking it directly to cabinet work in kitchen and bath projects. Its total load capacity of max. 256 lbs. supports use in high-capacity food or supply storage, where tall pull-outs are routinely filled with heavier items. Heavy-duty, noise-restricted roller guides support these higher loads while maintaining smoother travel, which is important on tall fronts that span a large portion of a cabinet face. The frame finish in carbon steel gray provides a neutral appearance that fits with a range of cabinet interior colors, helping the organizer integrate with different design programs. Basket bottoms available in carbon steel gray, walnut, and maple give additional appearance choices when matching to specific cabinet lines.
The EasyFit self-locking system for tool-free installation of the frame into upper and lower guide rails simplifies repeat installation across multiple tall pantry cabinets, because the same engagement method is used on each unit. Unhanded installation means a single system is applied in either left or right cabinet locations, which streamlines ordering and layout for runs of tall cabinets. The 3-D front adjustment feature allows simple door adjustment after the pull-out is fixed, so door reveals can be tuned relative to adjacent fronts without re-mounting the frame. Individual height adjustment for baskets helps installers tailor shelf positions in response to homeowner storage needs or commercial stocking patterns, improving the usefulness of vertical space. Full synchronized bottom runner and synchronized upper and lower end stops coordinate the pull-out motion, supporting controlled extension and retraction of the tall frame. PAM Power Assisted Movement in pull-out direction adds a power-assisted effect when pulling the unit out, reducing effort when the organizer is loaded toward its max. 256 lbs. total load capacity.
The TAL pantry Scalea CS 3-basket is a 3-shelf pull out pantry with soft-close slides designed as a pantry pull-out organizer for kitchen and bath pantry cabinets.
The TAL pull out pantry specifies a minimum installation depth of 23 inches, which sets the required cabinet interior depth for proper operation of the frame and slides.
The TAL 3-shelf pull out pantry has a total load capacity of max. 256 lbs., allowing it to handle substantial stored contents in a tall pantry cabinet.
The EasyFit self-locking system lets the frame lock into upper and lower guide rails without tools, helping installers position and secure the pull-out quickly.
The TAL pantry offers 3-D front adjustment for simple door alignment and individual height adjustment for baskets, so both the front and shelf levels can be tuned.
The frame finish is carbon steel gray, and basket bottoms are available in carbon steel gray, walnut, and maple, providing options to coordinate with cabinet interiors.
The TAL pantry Scalea CS 3-basket unit combines a 3-shelf pull out pantry with soft-close slides, a total load capacity of max. 256 lbs., and a minimum installation depth of 23 inches, giving clear parameters for cabinet design. EasyFit self-locking, unhanded installation, and 3-D front adjustment ground the system in straightforward mounting and fine-tuning. Frame and basket bottom finishes in carbon steel gray, walnut, and maple support visual coordination with project cabinetry. For new tall pantry cabinets or retrofits that match these dimensions and load needs, this Vauth-Sagel TAL pull out pantry organizer offers a defined, heavy-duty pantry pull-out solution.
Sold In: 1 Kit
