Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
3-shelf pull out pantry describes this Vauth-Sagel TAL carbon steel gray unit, which delivers a tall cabinet storage system that pulls fully out of the cabinet so contents move toward the user instead of staying buried in the opening. The unhanded installation design allows the same frame to work on either side of a cabinet opening, simplifying planning across multiple cabinet runs. Full synchronized bottom runner movement keeps the frame tracking straight during operation, supporting smooth travel when the pantry is loaded. Synchronized upper and lower end stops coordinate motion between the top and bottom guides, which helps the tall frame stop consistently at both ends of the slide travel. Heavy-duty, noise-restricted roller guides carry the moving load while dampening sound during opening and closing. The system is sold in kits so the frame, mechanism, and baskets are designed to operate together as one unit.
EasyFit self-locking engagement between the frame and the upper and lower guide rails means the installer seats the frame into the slides without separate fasteners at that interface, saving time when fitting multiple tall units. The minimum installation depth of 23 inches defines the cabinet interior depth required for the slides and frame, guiding box construction so the system achieves its intended travel. Heavy-duty, noise-restricted roller guides support up to a total load capacity of 256 pounds, allowing the pantry to carry substantial stored goods while maintaining controlled movement. Full synchronized bottom runner action keeps the pull-out aligned along its travel path under load, reducing racking forces on the cabinet sides. Self-closing and soft-closing behavior is integrated into the slide system so the pantry transitions into a controlled close once past a defined point in the opening cycle.
This Vauth-Sagel pantry pull-out organizer belongs to the Pantry Pull-Out Organizers product class, so it is intended to live inside a tall cabinet rather than function as a standalone shelf system. The frame height range of 37-1/2 inches to 47-1/4 inches targets mid-height tall cabinets, giving planners a defined usable zone when laying out casework dimensions. The TAL PANTRY SCALEA CS 3-BSKT,18X37.5 SAP description identifies this version as the three-basket, 18-inch wide configuration, which aligns the frame width with common tall pantry cabinet modules. The carbon steel gray frame finish provides a consistent color for the vertical structure, helping the organizer visually recede behind an applied front when the door is closed. The Vauth-Sagel brand association places this unit within a recognized kitchen and bath cabinet accessory line.
PAM Power Assisted Movement in pull-out direction adds mechanical assistance when pulling the loaded pantry forward, which lightens the feel of the motion under weight during daily use and supports smoother extension across the slide travel. The 3-D front adjustment allows the attached door front to be shifted vertically, horizontally, and in depth, which helps fine-tune the reveal and flushness with neighboring fronts after the cabinet is already installed. Individual height adjustment for the baskets lets the installer reposition each shelf on the frame, so tall items can be grouped where extra clearance is needed without redesigning the cabinet. Full synchronized bottom runner control coordinates movement across the slide elements, reducing twist in the frame that could otherwise demand later readjustment. Self-closing and soft-closing characteristics of the slides finish each stroke with a controlled draw-in, which reduces impact on the framing and supports long-term alignment of the moving components. The heavy-duty, noise-restricted roller guides combine load-bearing capacity with sound-damped operation, which supports a solid feel while keeping motion quiet in occupied spaces.
The Vauth-Sagel TAL pantry system lists a minimum installation depth of 23 inches, so cabinet interiors must meet that depth for the frame and slides to operate through their travel.
The pantry system has a total load capacity of up to 256 pounds, allowing it to support substantial stored goods across the frame and baskets during regular operation.
The EasyFit self-locking feature lets the frame snap into the upper and lower guide rails without tools at that connection, which speeds mounting and yields a defined seating position.
The TAL carbon steel gray frame is designed for cabinet heights from 37-1/2 inches to 47-1/4 inches, targeting mid-height tall pantry cabinets within that vertical range.
The self-closing and soft-closing slides draw the pantry gently into the cabinet for the final part of travel, which limits slamming and cushions stored contents during repeated openings.
The system provides individual height adjustment for baskets, so each shelf can be repositioned on the frame to accommodate changing container heights or different pantry layouts.
This TAL pantry Scalea carbon steel gray system combines a 3-shelf pull out pantry layout with PAM Power Assisted Movement and self-closing, soft-closing slides, giving tall cabinets a defined load capacity of up to 256 pounds. The EasyFit self-locking frame connection, 3-D front adjustment, and individually height-adjustable baskets convert a tall cabinet opening into an organized pull-out storage column that aligns visually with surrounding fronts. When a project calls for a Vauth-Sagel pantry pull-out organizer in the 37-1/2 inch to 47-1/4 inch frame range, this BOMTALPSC3B1837CSG kit provides the matched frame, mechanism, and baskets needed to build that interior.
Sold In: 1 Kit
