Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Replacement Plastic Dust Collection Bags are clear plastic collection bags sized with a 20 inch diameter and 29 inch length, so they match dust collectors built around that interface and allow straightforward fitting onto the collector housing. The product is classified as Dust Collection in the Machinery category, which directs it to dust collector use where controlled chip and dust capture matters in daily shop work. The bags provide a collection bag capacity of 5 and 3/10 cubic feet, giving room for a substantial volume of shavings before a change-out is needed during planing, jointing, or sanding runs. These bags are designed for systems rated at an air flow of 1,100 CFM at 4 feet, which keeps performance aligned with that air movement level in typical small to mid-size dust collectors. The manufacturer part number JT9-709563 identifies this specific Jet CB-5 clear bag set for consistent reordering.
The 20 inch diameter of the Jet CB-5 clear plastic bag sets the basic fit at the collector ring, so installers can wrap and secure the bag around dust collectors designed for that size without reworking clamps or supports. With a 29 inch length, the bag extends downward enough to hold the specified 5 and 3/10 cubic feet of material, so it can clear the base of common mobile or stationary collectors while still taking the full load. The 1,100 CFM air flow at 4 feet figure connects the bag to collectors built for that performance, so the system can move air and chips through to the bag without exceeding the intended operating range. A 2 micron efficiency rating keeps the bag within systems targeting that filtration level, supporting use in woodworking environments where fine sanding dust is part of the regular workflow.
The Web Description specifies that the Jet CB-5 clear plastic 20 inch diameter collection bag is for DC-1100VX and DC-1200VX units, so it slots directly into those JET dust collectors during routine maintenance. Positioning in the Machinery Dust Collectors category ties the bags to stationary or mobile collectors in woodworking shops, so they match the needs of planers, jointers, sanders, and table saws that are already piped into those systems. A 5 and 3/10 cubic foot capacity enables use on runs that generate substantial volume, such as thickness planing or wide-belt sanding, without immediate bag changes. The 2 micron efficiency rating allows the bag to work as part of a system aimed at capturing small airborne dust created by fine sanding, which is common in cabinet and furniture production workflows.
The 20 inch bag diameter and 29 inch length give a predictable cylindrical shape, so each replacement on a DC-1100VX or DC-1200VX can be seated in the same position, reducing setup variability from one change to the next. The clear plastic material, identified in the name and SAP description, lets operators see dust level against the 5 and 3/10 cubic foot capacity, so they can time bag changes with their production schedule rather than interrupting cuts unexpectedly. With air flow specified at 1,100 CFM at 4 feet, the bag is matched to collectors engineered for that air volume, which supports stable chip transport from machine ports through the ductwork into the bag. The JT9-709563 manufacturer part number defines the exact replacement, so maintenance staff can reference a single identifier when standardizing dust bag stock across multiple JET DC-1100VX and DC-1200VX collectors in the same facility.
The Replacement Plastic Dust Collection Bags are described as the Jet CB-5 clear plastic 20 inch diameter collection bag for DC-1100VX and DC-1200VX units, so they are intended for those specific JET dust collectors.
The Jet CB-5 clear plastic bag has a collection bag capacity of 5 and 3/10 cubic feet, so it can handle a substantial volume of chips and dust between change-outs in normal woodworking operations.
The collection bag is specified with a 20 inch diameter and a 29 inch length, so it fits rings built around that size while providing vertical depth for dust collection under the unit.
The Jet CB-5 clear plastic collection bag is listed with air flow at 4 feet of 1,100 CFM, so it aligns with dust collectors operating at that air movement level.
The collection bag has an efficiency of 2 micron, so it is specified to work within systems designed around capturing fine dust down to that particle size.
The Replacement Plastic Dust Collection Bags carry manufacturer part number JT9-709563, so that identifier ties directly to the Jet CB-5 clear plastic 20 inch diameter collection bag set.
The Jet CB-5 clear plastic 20 inch diameter collection bag, identified by part number JT9-709563, is specified for DC-1100VX and DC-1200VX dust collectors, so it delivers a direct replacement option that keeps those units operating within their designed range. With a 5 and 3/10 cubic foot capacity, 29 inch length, and 2 micron efficiency, the bag supports extended dust collection runs at 1,100 CFM at 4 feet in woodworking shops using JET Machinery dust collectors.