Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
9 x 3 60 grit sanding sleeves are aluminum oxide abrasive sleeves designed for industrial sanding applications, so they tackle stock removal and surface prep where a consistent cut is needed across repeated parts. The sleeves measure 9 inches long by 3 inches diameter, giving a large sanding area that covers more surface per pass for efficient workflow on properly sized spindles. The 60 grit aluminum-oxide grain cuts aggressively enough for shaping and heavy sanding while still producing a uniform scratch pattern that prepares material for further steps. These sleeves are spiral bound, which helps the abrasive track smoothly around the drum for even contact. They are resin bonded, which secures the grain to the backing under heavy-duty use so the abrasive stays effective through demanding runs. Each sleeve uses a tough fiber-backed construction that supports the abrasive under pressure so the sleeve stays stable on the spindle during continuous sanding.
These aluminum oxide sanding sleeves are specified to fit JET JBOS-5 and JOVS-10 sanders, so they align with the spindle sizing on those machines for straightforward setup. The 3 inch diameter and 9 inch length match common spindle sleeve dimensions, which helps the sleeve seat properly and stay stable during oscillating or rotating motion. The fiber-backed construction supports firm pressure against workpieces while the resin bond holds the abrasive in place, allowing the sleeve to track squarely on the spindle. Because the sleeves are engineered for heavy duty use, they handle the continuous movement typical of oscillating spindle sanders in cabinet, millwork, or general shop environments where repeated passes are common.
These abrasive sleeves are described for any industrial sanding application, which places them in workflows where parts move across spindle sanders for shaping, edge refinements, or surface prep. On JET JBOS-5 and JOVS-10 machines, the 3 inch diameter sleeve pairs with the machine spindles for sanding contours, arcs, and inside profiles that are difficult to reach with flat abrasives. The 9 inch sleeve length provides a tall sanding surface, letting operators use different vertical areas of the sleeve as workpieces index along the spindle. With 60 grit aluminum-oxide grain, these sleeves suit tasks like knocking down saw marks, blending routed edges, or preparing components for subsequent sanding steps in production settings. The aluminum oxide grain type is suited to general-purpose sanding across wood and typical shop materials where a predictable cut is important.
The spiral-bound sleeve structure wraps the abrasive evenly around the spindle, helping contact stay uniform as the sleeve rotates and oscillates so edges and curves track consistently. Resin-bonded grain means the abrasive is locked to the backing, so under heavy duty use the cutting surface remains attached, which supports consistent scratch patterns over longer runs. The tough fiber-backed sleeve gives the abrasive a stable base, resisting flex or deformation that would alter the sanding line, so profiles stay closer to layout throughout a batch. The defined 3 inch diameter and 9 inch length help operators work within known geometry when setting fences, jigs, or marking clearances around the spindle. Because these sleeves are available from 1/4 inch to 4 inch diameters to fit most sanders, they integrate into setups requiring multiple spindle sizes, letting shops match the sleeve size to the specific curve or opening being sanded.
These sanding sleeves are 3 inches in diameter and 9 inches long, giving a tall sanding surface that covers more area on each pass for industrial sanding tasks.
These sleeves use 60 grit aluminum-oxide grain, which provides an aggressive yet controlled cut suitable for stock removal and surface preparation in industrial applications.
These abrasive sleeves fit JET JBOS-5 and JOVS-10 sanders, aligning with their spindle dimensions so the sleeves seat correctly during oscillating sanding operations.
The spiral-bound design wraps the abrasive evenly around the sleeve, promoting smooth contact with the workpiece and supporting consistent material removal around curves and edges.
The resin-bonded construction holds the aluminum-oxide grain firmly to the fiber backing, so the cutting surface remains effective through heavy duty industrial sanding runs.
The tough fiber-backed sleeve gives structural support under load, helping the sleeve keep shape on the spindle and maintain a predictable sanding profile over time.
The JT9-575946 9 x 3 60 grit aluminum oxide sanding sleeves from JET Tools pair industrial sanding performance with a spiral-bound, resin-bonded, fiber-backed design that supports repeatable results. When your workflow uses JET JBOS-5, JOVS-10, or comparable sanders needing 3 inch by 9 inch sleeves, this configuration aligns with the spindle size and sanding height. For shops running spindle sanding as a regular station, choosing sleeves with this construction helps keep material removal consistent across runs and supports steady surface preparation. Add these sleeves to maintain an abrasive setup that matches industrial sanding demands while staying within known dimensions and grit.