Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
9 x 3 100 grit aluminum oxide sanding sleeves from JET Tools are abrasive sleeves designed for industrial sanding applications where a consistent 100-grit finish is needed. The 9 inch by 3 inch size covers a broad contact area, so each pass removes material across a wider face while holding a predictable scratch pattern. The aluminum-oxide grain delivers the cutting action, shaping and smoothing workpieces where a medium-fine abrasive is required. Because these sleeves are built for any industrial sanding application, they support workflows from shaping to final prep on a range of sanding stations. The defined grit rating lets installers and shop crews match this sleeve to steps in a sanding sequence when they need uniform stock removal without jumping to a very coarse or very fine abrasive.
The 9 inch by 3 inch 100 grit sanding sleeve works on sanders designed for sleeves in this size range, aligning the abrasive length and diameter with compatible spindles. When a sleeve fits the spindle correctly, the spiral bound, fiber-backed structure seats firmly, helping it stay centered as the drum rotates. Because the sleeves are available from 1/4 inch to 4 inch diameter to fit most sanders, shops can standardize on this construction across different spindle diameters. The fit on JET JBOS-5, JOVS-10, and other brand sanders means teams using those models can match a known sleeve size and grit to their sanding setups for repeatable results.
JET Tools aluminum oxide sanding sleeves are specified as perfect for any industrial sanding application, so they are suited to production shops and install-focused operations that rely on powered sanders. The 9 inch by 3 inch format pairs with sanders that accept this sleeve size, including JET JBOS-5, JOVS-10, and other brand sanders designed for compatible sleeves. Aluminum-oxide grain lets these sleeves work on typical shop sanding tasks where a 100-grit cut is appropriate, such as refining profiles or preparing surfaces after coarser grits. Because the sleeves are available from 1/4 inch to 4 inch diameter to fit most sanders, the same abrasive style can be used on small-diameter spindles for tight curves and larger diameters for broader arcs.
The spiral bound design keeps the abrasive wrapped evenly, so when the sleeve is installed on a suitable spindle, the sanding surface tracks predictably around the drum and supports consistent contact with the workpiece. Resin bonded aluminum-oxide grain holds tightly to the tough fiber-backed sleeve, so the abrasive surface stays intact across repeated sanding passes in an industrial setting. That grain retention helps maintain a steady 100 grit performance instead of dropping off prematurely. The tough fiber-backed construction resists flexing and tearing as the sleeve works against edges, curves, and end grain, which supports smoother motion and less interruption during runs. Because the sleeves are specified to fit JET JBOS-5, JOVS-10, and other brand sanders, operators on those machines can select this JT9-575948 sleeve knowing the size and build align with equipment designed for similar abrasive sleeves.
The 9 x 3 100 grit sanding sleeves use aluminum-oxide grain, which provides the cutting action needed for industrial sanding where a consistent 100-grit finish is required.
The sanding sleeves fit JET JBOS-5, JOVS-10, and other brand sanders that accept sleeves in this size and style, aligning the abrasive with compatible spindle setups.
The spiral bound construction keeps the sleeve wrapped evenly around the drum, helping it track smoothly and reducing shifting while sanding in continuous industrial use.
The resin bonded construction secures the aluminum-oxide grains to the backing, so the abrasive surface stays effective under pressure and repeated contact with the workpiece.
The tough fiber-backed sleeve provides a firm base for the abrasive, helping it resist tearing and maintain shape when sanding edges, curves, and other demanding surfaces.
The 100 grit rating defines the abrasive cut level, so these sleeves remove material at a medium-fine rate suited to refining surfaces after coarser grits in industrial sanding.
The 9 inch x 3 inch 100 grit aluminum oxide sanding sleeves from JET Tools combine spiral bound, resin bonded, fiber-backed construction with a format that fits JET JBOS-5, JOVS-10, and other brand sanders. For shops needing sleeves suited to any industrial sanding application, choosing this JT9-575948 sleeve lets crews align a known 100-grit abrasive with machines designed around this style of sanding sleeve.