Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
JET TR bandsaw scroll blade is a 67-1/2 inch JET Tools bandsaw blade designed to handle detailed work where control and fine cut quality matter. The 18 TPI design allows for detailed and intricate scrolling against the grain, so the blade tracks tight lines instead of tearing across the workpiece. The 1/8 inch blade width supports scrolling paths that need sharper turns than wider blades allow, which is useful when layout demands small radiuses or narrow profiles. The 0.025 inch blade thickness keeps the kerf slim, which removes less material and helps patterns stay true to layout lines. The blade is made of carbon flex back steel, ground and set for sawing consistency, so tooth geometry and set work together to keep the cut following the marked line from start to finish.
The 67-1/2 inch length works with bandsaws designed around that blade size, so the wheels can bring the blade up to working tension without overstraining it. The 1/8 inch width allows the blade to follow curves commonly used in scrolling layouts, so operators can steer through patterns that would force a wider blade to bind. The 0.025 inch thickness balances stiffness with a slim kerf, so the blade stays stable in the cut while still leaving a narrow path in the work. The 18 TPI design supports detailed and intricate scrolling against the grain, which helps the teeth bite cleanly into cross-grain fibers and maintain a controlled feed rate on tighter work.
This JET Tools bandsaw blade is part of the bandsaw blades product class, which situates it squarely in bandsaw-based cutting setups. The 18 TPI design allows for detailed and intricate scrolling against the grain, so it suits work where cuts move across grain direction and still need a refined edge. The 1/8 inch width positions the blade for layouts requiring sharp directional changes, such as tight radius curves or narrow inside profiles that wider blades cannot follow. The 0.025 inch thickness limits how much material is removed, so intricate shapes maintain strength around fine details instead of being opened up by a wide kerf.
The carbon flex back steel construction, ground and set for sawing consistency, supports repeatable tracking from one part to the next, which reduces the need to rework pieces due to wandering cuts. Because the teeth are ground and set, the cutting edges and tooth set are prepared for a uniform path through the work, which helps fixtures and jigs deliver predictable part geometry. The 67-1/2 inch length aligns with saws built for that dimension, so tension and tracking adjustments respond consistently, allowing shops to dial in performance and return to the same settings for repeat jobs. The 18 TPI tooth design that allows detailed and intricate scrolling against the grain helps maintain control on slow, careful cuts, which matters when a project combines tight curves with cross-grain travel in the same layout.
The JET TR bandsaw scroll blade is described with an 18 TPI design that allows for detailed and intricate scrolling against the grain, which aligns with precision cutting in typical woodworking applications.
The 18 TPI design allows for detailed and intricate scrolling against the grain, so the high tooth count supports fine cuts where smooth edges and controlled feed are important.
The 1/8 inch blade width supports scrolling paths that need sharper turns than wider blades, which is useful when patterns demand tight radiuses or narrow profiles.
The 0.025 inch thickness keeps the kerf slim, which removes less material and helps intricate layouts stay close to the original marked lines on the workpiece.
The blade is made of carbon flex back steel, ground and set for sawing consistency, so tooth geometry and set work together to support steady tracking during cuts.
The 67-1/2 inch length identifies the overall blade size, which aligns with bandsaws designed for this length so tension and tracking can be established correctly.
The JET TR bandsaw scroll blade combines a 67-1/2 inch length, 1/8 inch width, and 0.025 inch thickness with an 18 TPI design that allows for detailed and intricate scrolling against the grain. The carbon flex back steel, ground and set for sawing consistency, supports steady tracking across repeated cuts. For projects where tight curves, fine details, and cross-grain travel must all share the same layout, this JT9-707201 bandsaw blade offers dimensions and tooth geometry tailored to that style of work.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  JP708115K Mfr# JT9-708115K | Jet Tools 708115K 14" Closed Stand Bandsaw 1HP Single Phase 115/230V |