
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
JET SK bandsaw blade 67-1/2 x 1/4 gives you a sized blade built for bandsaws that take a 67-1/2 inch length, so you can match the blade to machines designed around this length and keep cuts tracking properly around the wheels. The 1/4 inch width supports controlled curved and straight cuts, so you can handle detail work while still maintaining a true line in thicker material. A .025 inch thickness gives a balance of beam strength and flex, so the blade can stay stable in the cut while still negotiating the bandsaw guides. With a 6 TPI configuration, the teeth are spaced to clear material efficiently in thicker stock, which helps maintain feed rate without overloading the cut. This blade is built as a JET SK model, so it aligns with JET Tools standards for bandsaw cutting performance.
The 67-1/2 inch length gives you a fixed reference for selecting a blade to match bandsaws designed around this size, so tension and tracking can be set within the saws normal range. A 1/4 inch width seats well in typical bandsaw guides, so guide blocks or bearings can support the blade close to the work for better line control. With .025 inch thickness, the blade runs comfortably between guides that are set for light to medium-duty work, so adjustments remain straightforward during setup. The 6 TPI skip-tooth pattern presents an alternating series of cutting edges and open gullets, so chip clearance supports steady cutting when working into thicker sections or during light resawing operations.
This JET Tools bandsaw blade is a 67-1/2 inch long, 1/4 inch wide blade built for bandsaws that accept this specific length, so it serves well where that dimension is required for proper tracking. The 6 TPI skip-tooth design is described as working well for resawing and cutting thicker stock, so it fits jobs where you are regularly feeding deeper material into the blade and need room for chip clearance in the cut. Because the teeth are ground and set for sawing consistency, the blade is intended to deliver a predictable cut path over repeated passes, which helps when repeating similar cuts across multiple pieces of thicker material. Made of carbon flex back steel, the blade is constructed so the back can flex around the wheels while the working edge does the cutting, supporting ongoing use in general shop bandsaw work.
The 6 TPI skip-tooth design spaces teeth farther apart and opens up the gullet area, so chips produced in thicker stock have room to clear from the kerf instead of packing in, which helps maintain cutting efficiency under steady feed. When resawing or cutting thicker stock, this same tooth layout lets the blade pull waste out of the cut as it advances, so heat and friction in the cut zone are reduced compared to a closely spaced fine-tooth pattern. The fact that the teeth are ground and set for sawing consistency means the cutting edges and tooth set are formed to present a regular pattern to the work, so the blade tracks in a more predictable way for repeated cuts. Carbon flex back steel construction gives the blade a flexible back with a cutting edge suited to bandsaw duty, so it can repeatedly flex around the wheels while maintaining tooth geometry aimed at consistent sawing results.
The blade measures 67-1/2 inches in length, 1/4 inch in width, and .025 inch in thickness, so it matches bandsaws sized for this length while supporting controlled cutting with a moderate blade body.
The 6 TPI skip tooth pattern spaces teeth and opens gullets, so chips clear efficiently when resawing or cutting thicker stock, helping maintain smooth feed and cutting performance in deeper material.
The blade is made of carbon flex back steel, so the back can flex around the bandsaw wheels while the tooth edge provides cutting performance aimed at consistent sawing behavior.
The blade combines a 1/4 inch width, .025 inch thickness, and 6 TPI skip tooth pattern, so it suits both resawing and cutting thicker stock in a range of shop applications that use this length.
The teeth are ground and set for sawing consistency, so the cutting edges and set pattern aim to keep the blade tracking predictably, which supports repeatable cuts across multiple workpieces.
The .025 inch thickness balances stiffness and flexibility, so the blade maintains stability in the cut while still flexing properly through the guides and around the bandsaw wheels during operation.
This JET SK bandsaw blade from JET Tools combines a 67-1/2 inch length, 1/4 inch width, and .025 inch thickness with a 6 TPI skip-tooth pattern, so it is suited to resawing and cutting thicker stock on bandsaws built for this size. The carbon flex back steel body with teeth that are ground and set for sawing consistency supports repeatable cuts when you are running multiple pieces through the saw. For shops handling deeper material on a compatible bandsaw length, this JT9-707204 blade offers a focused option for thicker stock work.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Kit | JP710116K Mfr# JT9-710116K | Deluxe Pro Bandsaw Kit, 14" JWBS-14DXPRO - Jet Tools 710116K | ||||
Sold in: 1 Each | JP708115K Mfr# JT9-708115K | Jet Tools 708115K 14" Closed Stand Bandsaw 1HP Single Phase 115/230V |