
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Jet Tools 717515 JCDC-1.5 Cyclone Dust Collector pulls heavy debris down into its 20 gallon drum before the debris stream reaches the filter, which maintains constant suction during extended machine runs. The cyclone design directs fines to a pleated filter, so the system separates chips from fine dust in one workflow. Fine dust particles are filtered through pleated material that captures even the smallest particles down to 1 micron and below, which helps keep air cleaner around machines during sanding and cutting. The 1.5HP single phase 115V motor power matches common small-shop electrical service, so the unit fits typical woodworking shop infrastructure. As part of JET Tools dust collection, this cyclone dust collector integrates into machinery layouts where chip and dust control are critical to surface quality and equipment life.
The JCDC-1.5 cyclone dust collector runs on single phase 115V power, so wiring aligns with standard shop circuits that support small to mid-size woodworking machines. The direct mount filter design eliminates ridged flex hose and bends between the cyclone body and filter, so there are fewer connection transitions to seal during installation. Heavy debris is pulled down to the collection drum before air reaches the filter, so ducting to machines can be sized around consistent suction instead of frequent clog-related losses. Swivel casters under the unit provide mobility, so the collector can be positioned to suit duct runs or moved to clear floors for larger workpieces.
This JET Tools 717515 JCDC-1.5 Cyclone Dust Collector is positioned for woodworking shops that need machinery dust collection under a single phase 115V supply, so it aligns with many cabinet and millwork environments. The cyclone pulls heavy debris down to the 20 gallon drum before air reaches the filter, so machines generating large chip volumes, such as planers and jointers, see less chip load at the filter. Heavy debris is captured in the drum with quick release levers and independent casters, so crews can roll the drum out from under the cyclone body and handle chip disposal as a separate, repeatable step. Fine dust is then handled by the pleated filter that captures particles down to 1 micron and below, so sanding and routing stations benefit from reduced fine dust recirculating in the shop air around operators and finished parts.
The direct mounted filter eliminates inefficiencies from ridged flex hosing and bends, so static pressure loss between the cyclone and filter housing is reduced, helping tools receive more consistent suction at the hood. Heavy debris being pulled down to the collection drum before reaching the filter keeps the pleated media from loading prematurely, so intervals between manual cleaning cycles are extended during normal production. When cleaning is required, the double paddle manual cleaning system quickly cleans the pleated filter, so operators can restore performance from the machine location instead of disassembling the filter housing. The radio frequency remote control works from up to 50 feet away, so workers can start and stop the dust collector from across the shop without returning to the unit, which supports efficient changeovers between machines. Swivel casters make it easy to move the unit around the shop, so layouts can be adjusted as equipment changes without committing to a fixed dust collection position.
The JCDC-1.5 cyclone dust collector uses a 1.5HP single phase 115V motor, so it operates on typical shop electrical service for many woodworking machines.
The pleated filter on this JET cyclone dust collector captures fine dust particles down to 1 micron and below, so it reduces airborne fine dust around active machines.
The direct mounted filter eliminates ridged flex hosing and bends between the cyclone and filter, so airflow losses in that section of the system are reduced.
The JCDC-1.5 cyclone dust collector uses a 20 gallon drum for heavy debris, so chip loads from planers and jointers can be managed in larger batches.
The dust collector uses a double paddle manual cleaning system for the pleated filter, so operators can mechanically clean the media between jobs from the unit.
The radio frequency remote control for this cyclone dust collector works from up to 50 feet away, so users can start or stop the unit from across the shop.
The JCDC-1.5 cyclone dust collector from JET Tools combines a 1.5HP single phase 115V motor with cyclone separation, so heavy debris and fine dust are handled in a single system. With a direct mount filter, 20 gallon drum, double paddle manual filter cleaning, and a radio frequency remote that works from up to 50 feet away, this unit supports efficient dust control around multiple woodworking machines. Select this cyclone dust collector when consistent suction, manageable chip collection, and fine dust filtration down to 1 micron and below are priorities for daily shop work.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Package | JP717511 Mfr# JT9-717511 | Jet Clear Plastic Bag for Jet Cyclone Canister (All Models 5 Bags) | ||||
Sold in: 1 Package | JP717516 Mfr# JT9-717516 | Replacement Drum Collection Bag (Pack of 5) | ||||
Sold in: 1 Package | JP717521 Mfr# JT9-717521 | 20" Drum Collection Bag for JCDC-2 Dust Collector (Pack of 5) | ||||
Sold in: 1 Package | JP717531 Mfr# JT9-717531 | Jet Jcdc-3 Clear Plastic Bag, SET/5 |