
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
JCDC-2 cyclone dust collector from JET Tools is designed to move heavy debris into a 30 gallon drum while fine particles are captured in a pleated filter, so your dust collection stays effective across longer runs in the shop. The cyclone action pulls heavy debris down to the collection drum before the debris stream reaches the filter, which helps maintain constant suction during planing, jointing, and sanding tasks. The unit is powered by a 2HP motor in a single phase 230V configuration, giving the system the strength needed for demanding woodworking machinery. Fine dust is filtered through pleated material that captures particles down to 1 micron and below, improving air filtration performance during extended operation. A direct mounted filter removes the inefficiencies created by ridged flex hose and bends, so more of the airflow ends up at the tool where it is needed.
The dust collector runs on single phase 230V power, so it pairs with shops wired for 230V circuits to support the 2HP motor. A direct mount filter removes the need to route air through extra hose sections between the collector and filter, which simplifies the airflow path during installation. The included radio frequency remote control operates the system from up to 50 feet away, allowing the operator to start and stop the collector from different areas of the shop. Remote timer settings let the system run for 2, 4, 6, or 8 hours before shutting down, which supports extended dust collection during longer machining or sanding sessions.
This Jet Tools 717520 JCDC-2 cyclone dust collector is suited to shops that need 2HP, single phase 230V performance for machinery in the dust collection category. The cyclone pulls heavy debris into a 30 gallon drum, so chips and larger waste settle in the drum before reaching the filter, which is helpful when connected to machines that generate continuous streams of shavings. Independent casters under the drum allow the container to roll out from under the collector, making disposal of heavy debris more manageable when the drum fills. Quick release levers on the drum are designed so the drum can be detached without complex disassembly, helping return the system to operation with less downtime between loads. The overall design supports dust collection workflows where machines run for extended periods.
The direct mounted filter eliminates the inefficiencies caused by ridged flex hosing and bends between the collector and filter, so the airflow path remains short and efficient for better suction at the tool. Fine dust particles are captured by a pleated filter media that traps particles down to 1 micron and below, which reduces fine airborne dust around the working area during cutting and sanding operations. The double paddle manual cleaning system gives the operator a way to clear dust off the pleats, helping recover airflow when the filter surface has loaded with fine material. Heavy debris being pulled down to the collection drum before the debris stream reaches the filter means fewer chips contact the filter, which reduces clogging and maintains suction stability. The radio frequency remote control works from up to 50 feet away, letting the operator control the dust collector without returning to the unit, which supports smoother workflow around larger shops.
The JCDC-2 cyclone dust collector uses a 2HP motor in a single phase 230V configuration, which supports running the unit on 230V shop circuits for demanding dust collection tasks.
The cyclone design pulls heavy debris down to the 30 gallon drum before air reaches the filter, which reduces filter loading and helps maintain more constant suction during extended machine use.
The pleated filter on this dust collector captures fine dust particles down to 1 micron and below, which improves air filtration performance around cutting and sanding equipment.
The direct mounted filter eliminates the need for ridged flex hose and bends between the collector and filter, simplifying the airflow path and reducing losses in the installed system.
The heavy debris is captured in a 30 gallon drum with quick release levers and independent casters, which allows the drum to roll out for emptying while supporting easier handling of full loads.
The radio frequency remote works from up to 50 feet away and the timer allows 2, 4, 6, or 8 hour run times, so the collector can operate across longer sessions without returning to the unit.
The JET Tools 717520 JCDC-2 cyclone dust collector combines a 2HP, single phase 230V motor with a cyclone that sends heavy debris to a 30 gallon drum and a pleated filter that captures particles down to 1 micron and below. The direct mounted filter reduces airflow losses that come from ridged flex hosing and bends, while the double paddle manual cleaning system lets you clear the filter surface when fine dust builds. With radio frequency remote control, a timer that runs the system for 2, 4, 6, or 8 hours, and a drum on independent casters, this dust collector supports continuous woodworking operations where efficient dust handling is part of keeping machines productive.