JET SFX Bandsaw Blade For Jet JWBS-14SFX

JET SFX bandsaw blade 116 x 1/4 4TPI is a high carbon steel blade sized 116 inches long and 1/4 inch wide with 4 teeth per inch, so it matches applications that need this specific length, width, and tooth count on compatible bandsaws. The blade is described for Jet JWBS-14SFX, so it serves as a correctly sized option for that saw when a 116 inch by 1/4 inch blade with 4 TPI is required. Its high carbon steel construction makes the teeth harder and longer lasting, which supports extended cutting performance before a change-out is needed. The 4 TPI configuration spaces the teeth for more aggressive cutting, which helps when operators prioritize faster material removal using this blade profile. JET Tools branding and the JT9-WBSB-116144 part number identify it precisely, which matters when matching existing blades or ordering by specification.

Key Blade Details That Support Woodworking

• The 116 inch blade length matches setups that require this specific loop size, so installers can fit it to bandsaws designed for a 116 inch blade run without improvising tension range.
• The 1/4 inch blade width provides a narrow band profile, which supports cutting tasks that use this width where a slim kerf and tighter curve potential are part of the job plan.
• The 4 teeth per inch configuration creates a coarse tooth pattern, which favors faster cutting where material removal speed with this tooth spacing is prioritized over very fine surface finish.
• The high carbon steel construction makes the blade harder and longer lasting, which supports extended service life under regular use compared to softer blade materials with similar geometry.
• The JET Tools brand and JT9-WBSB-116144 number tie directly to the Jet JWBS-14SFX description, which streamlines identifying the right blade when matching specifications in a shop inventory.

Installation Fit For 116 Inch Jet Bandsaws

This bandsaw blade is 116 inches long, so it aligns with bandsaw installations built around that loop length on compatible machines. The 1/4 inch width helps the blade track in guides sized for that band width, which supports predictable alignment when tensioned. With 4 TPI, the tooth pattern interacts with the material at a coarser pitch, which affects feed feel as operators advance stock through the cut. Being for Jet JWBS-14SFX, it corresponds to that saws stated blade dimensions, which simplifies swapping blades when repeating a known setup. The high carbon steel body offers harder, longer lasting teeth, which supports consistent behavior over multiple installations before replacement.

How This Bandsaw Blade Works In Daily Use

Where This 116 x 1/4 Blade Is Applied

This bandsaw blade is described as 116 inches long and 1/4 inch wide, so it suits bandsaw setups built around that specific loop length and narrow blade profile. On bandsaws matching those dimensions, the blade length lets the wheels carry proper tracking within the design range, while the 1/4 inch width occupies guides designed for that size. The reference to Jet JWBS-14SFX ties the blade to that saws dimensional needs when a 116 inch by 1/4 inch blade is specified, so shops using that saw can align it with existing documentation for that configuration. The 4 TPI tooth count matches cutting where a coarse tooth spacing is preferred, which helps when operators plan cuts that prioritize throughput using a blade of this geometry on suitable material.

Details That Support Repeatable Cutting Results

The high carbon steel construction makes the blade harder and longer lasting, so the teeth maintain their form over more cuts, supporting repeatable tracking and cut behavior across multiple sessions. The 4 teeth per inch pattern presents fewer, larger gullets along the 116 inch loop, which helps the blade clear chips in line with its coarse pitch and supports steady feed in operations planned for that tooth spacing. The 1/4 inch width defines how the blade sits between guides and over wheels, so once a setup is dialed in for this width, replacements with the same specification help maintain similar handling. Using the defined JT9-WBSB-116144 part number ties reorders to this exact combination of 116 inch length, 1/4 inch width, 4 TPI, and high carbon steel, which supports consistent performance when repeating established procedures on the Jet JWBS-14SFX or other bandsaws sized for this blade.

Common Questions About This Jet Bandsaw Blade

Select This Blade For Matching Jet Setups

This JET Tools bandsaw blade combines a 116 inch length, 1/4 inch width, and 4 TPI tooth pattern with high carbon steel construction, so it fits applications designed around this geometry where longer lasting teeth are valued. Its description for Jet JWBS-14SFX and identification as JT9-WBSB-116144 allow shops to align purchases with documented requirements for that saw and any other bandsaw built for a 116 inch by 1/4 inch, 4 TPI blade. For operations planning cuts around this coarse pitch and narrow width, adding this blade through Wurth Baer Supply supports consistent, spec-matched performance across repeat jobs.