Powermatic PM1300TX-BK Dust Collector 1.75HP 1Ph 115/230V 30 Micron Bag Filter Kit

Powermatic PM1300TX-BK Dust Collector For Shop Use

Powermatic PM1300TX-BK dust collector delivers dust collection for woodworking setups by combining a 1.75HP motor and 1-phase 115/230V power, so the unit supports typical shop electrical service while supplying consistent airflow during planing, jointing, or sanding runs. The 30 micron bag filter kit captures dust down to the stated level, which keeps larger fines out of the shop environment and helps maintain cleaner air around machines and benches. The Turbo Cone chip separation feature improves chip separation and collector bag packing efficiency, so more waste settles into the bag and the usable capacity is better utilized between changeovers. The cone also eliminates premature filter clogging for sustained performance, which means suction remains steadier over longer jobs and there is less interruption for filter cleaning while working.

Dust Collection Features That Support Workflow

• Turbo Cone chip separation improves chip separation and collector bag packing efficiency, so chips drop into the bag more effectively and the bag volume is used more fully before servicing.
• The cone eliminates premature filter clogging for sustained performance, which keeps airflow more consistent and helps machines maintain extraction during continuous cutting cycles.
• The steel impeller is powered by a 3 HP motor for peak performance, driving strong air movement so the collector can handle multiple hoses and heavier chip loads during demanding operations.
• Triple 4 inch dust ports allow for several hoses to be attached at the same time, letting multiple machines stay hooked up and reducing hose swapping between cuts.
• All-metal duct construction provides rigidity and improved air flow, so the duct runs resist damage and internal surfaces support smoother air movement to the collection point.
• The remote-controlled digital timer can be programmed for up to 99 minutes, allowing the collector to run for a set period after machining so lingering dust in ducting is pulled through without manual shutoff.

Installation, Power, And Duct Connection Details

The PM1300TX-BK uses 1-phase 115/230V power, so it ties into standard single-phase shop electrical systems commonly found in small to mid-size woodworking spaces. The 1.75HP rating works with the specified voltage range to deliver dust collection capacity without shifting away from typical branch circuits found in many shops. Triple 4 inch dust ports give defined connection points for 4 inch hoses, which simplifies duct layout because branches can be planned around three fixed outlets on the collector. All-metal duct construction offers rigidity throughout the run, so hangers and supports can be spaced to suit a solid duct line that resists flex while maintaining the improved air flow described in the product data.

Using This Powermatic Dust Collector In The Shop

Where The PM1300TX-BK Dust Collector Fits Best

This Powermatic Tools dust collector is designed within the dust collection product class, so it is suited to pulling waste from woodworking machinery in cabinet and millwork environments. The 3 HP motor driving the steel impeller delivers peak performance, which supports use on equipment that generates heavier chip volumes such as planers, jointers, and table saws. The 30 micron bag filter kit gives a defined filtration level that targets chips and larger dust, which works well where the priority is clearing machines and floors of bulk debris. Turbo Cone chip separation improves chip separation and collector bag packing efficiency, so long shavings and chips from surfacing operations settle into the bag more predictably, reducing the frequency of bag changes in active shops.

How Design Details Help Workflow And Consistency

The cone eliminates premature filter clogging for sustained performance, so static pressure stays steadier over extended runs and machines see more consistent extraction, reducing dust buildup around cutters and fences. Triple 4 inch dust ports allow for several hoses to be attached at the same time, which keeps key machines connected and helps operators move from one station to another without pausing to reconnect ducting. All-metal duct construction delivers rigidity and improved air flow, so once duct lines are aligned to machines they stay in place and the smooth internal paths support efficient movement of chips toward the steel impeller. The remote-controlled digital timer programmable for up to 99 minutes lets the collector continue running after the last cut, clearing residual dust from vertical drops and branches while operators focus on cleanup or next-job prep instead of monitoring shutoff.

Common Questions About The PM1300TX-BK Dust Collector

Selecting The PM1300TX-BK For Your Dust Collection

The Powermatic PM1300TX-BK dust collector combines a 1.75HP, 1-phase 115/230V motor with a 30 micron bag filter kit, so it aligns with typical shop power while targeting chips and larger dust. Turbo Cone chip separation and the cone that eliminates premature filter clogging work together to sustain performance over longer runs, which supports steady extraction during demanding projects. Triple 4 inch dust ports, all-metal duct construction, and the programmable remote timer create a defined connection and control setup that supports organized machine layouts. Put this configuration to work where multi-machine dust extraction and predictable airflow are priorities.