Powermatic PM1300TX-CK Dust Collector 1.75HP 1Ph 115/230V 2 Micron Canister Kit

Powermatic PM1300TX-CK Dust Collector For Shop Use

Powermatic PM1300TX-CK dust collector combines a 1-3/4 HP motor with a Turbo Cone system to move dust and chips efficiently, so woodworking machines stay clearer during ripping, planing, and sanding. The Turbo Cone improves chip separation before debris reaches the collector bag, which helps the bag pack dust more effectively and maintains airflow under load. The cone also reduces premature filter clogging, keeping suction more consistent during extended cutting or sanding runs. A steel impeller, driven by the 1-3/4 HP motor, delivers peak performance when pulling from multiple machines. All-metal duct construction provides rigidity, so duct runs stay aligned while also supporting improved air flow. Triple 4 inch dust ports on the collector housing create a central connection point for several hoses, letting you service multiple stations without constant hose changes.

Dust Collection Details That Support Daily Workflow

• The Turbo Cone improves chip separation ahead of the bag, which keeps heavier chips from loading the filter too quickly, extending effective run time between maintenance breaks during typical woodworking tasks.
• The cone reduces premature filter clogging, so the collector keeps pulling air more consistently through connected machines, which supports steadier dust removal at table saws, planers, or sanders over longer sessions.
• The steel impeller powered by a 1-3/4 HP motor delivers peak performance, giving the unit the strength to handle demanding dust loads from larger machines without losing draw at the pickup points.
• All-metal duct construction adds rigidity to the system, helping duct lines hold their shape and alignment while also promoting improved air flow compared with flexible-only runs in a fixed shop layout.
• Triple 4 inch dust ports allow several hoses to be attached at once, so a single collector can stay plumbed to multiple tools and reduce the time spent reconnecting lines between operations.

Installation And Connection Setup For This Dust Collector

The PM1300TX-CK dust collector operates on a 1-3/4 HP, single-phase 115/230V motor, giving shops flexibility to match available power when wiring the unit into the dust collection layout. Triple 4 inch dust ports on the collector body provide straightforward hose connection points, so layout can be planned around standard 4 inch duct branches. All-metal duct construction on the unit supports rigid tie-in to shop ducting, helping transitions stay aligned for smoother internal airflow. The steel impeller is driven directly by the motor, so there is a solid link between motor output and air movement when connected to machines. A remote-controlled digital timer, programmable up to 99 minutes, lets the collector run for a set period after machines stop, clearing lingering airborne dust without manual shutoff steps.

How This PM1300TX-CK Collector Fits Shop Dust Control

Where The Powermatic PM1300TX-CK Dust Collector Excels

This Powermatic Tools PM1300TX-CK dust collector is built for dust collection work in woodworking environments that use multiple stationary machines. The 1-3/4 HP, single-phase 115/230V motor drives the steel impeller to handle substantial chip volume from planers, jointers, or table saws that feed into a central system. Triple 4 inch dust ports on the unit allow several hoses to remain connected simultaneously, which suits shops that keep a few primary machines tied into one collector. The Turbo Cone improves chip separation and bag packing efficiency, so the system moves heavy chips into the collector bag while maintaining airflow through the filter. That separation is valuable when running thickness planers or jointers that generate large volumes of chips in a short time. All-metal duct construction contributes rigidity and improved air flow at the collector body, fitting permanent or semi-permanent duct layouts.

Why Turbo Cone And Timer Features Support Consistent Results

The Turbo Cone design improves chip separation ahead of the filter, which keeps the collector bag packing dust more efficiently and reduces premature filter clogging, so suction remains more stable across a full work session. This sustained performance matters when working through longer milling or sanding jobs, where airflow consistency affects how clean the machines stay. The steel impeller, powered by the 1-3/4 HP motor, converts motor output into strong air movement, helping maintain pickup at each connected hose even as the bag fills. The remote-controlled digital timer, programmable for up to 99 minutes, lets the collector continue running after cutting stops, clearing suspended dust from the duct lines and machine cabinets during finishing passes. All-metal duct construction coordinates with these features by supporting smoother airflow paths at the collector, which helps the system take full advantage of the impeller and cone design.

Common Questions About The PM1300TX-CK Dust Collector

Select The PM1300TX-CK Dust Collector For Multi-Machine Dust Control

The Powermatic PM1300TX-CK 1-3/4 HP, single-phase 115/230V dust collector with Turbo Cone and steel impeller offers sustained performance for shops running multiple woodworking machines. Triple 4 inch dust ports support multi-hose setups, while all-metal duct construction and the programmable remote-controlled timer create a stable, efficient dust collection point for ongoing production work.