Dynabrade Replacement Pad Medium No Hole 1/2" Pad - Non-Vacuum PSA, - 58022

Dynabrade Replacement Pad 58022 For Sanding Control

Dynabrade replacement pad 58022 is a medium density urethane foam sanding pad designed to support a wide range of sanding applications on Dynafine tools. The premium self-skinning urethane foam forms a stable, resilient base, which helps the pad follow contours while still backing the abrasive for controlled stock removal on woodworking jobs. A 3/8 inch (10 mm) thick pad profile balances flexibility with support, so the surface can handle coarse to ultra fine grit abrasives without changing pads between stages. The 1/2 inch (13 mm) diameter backsplash radius disc design focuses contact at the edge, helping you work tight radius profiles with predictable results. A vinyl face ties directly to pressure sensitive adhesive sanding discs, keeping PSA abrasives firmly attached during use so the abrasive stays flat and productive across the workpiece.

Key Sanding Pad Details That Support Your Work

• The premium self-skinning urethane foam construction provides consistent support and flexibility, translating into smoother sanding transitions when moving from coarse to ultra fine grits on the same panel or profile.
• The 3/8 inch (10 mm) thick, medium density pad body offers enough cushion to conform to subtle contours while still backing the abrasive, which helps maintain even scratch patterns on woodworking edges and surfaces.
• The premium vinyl face material securely holds pressure sensitive adhesive (PSA) abrasives, so discs stay put under load and alignment stays stable as you move across cabinet parts, doors, or trim components.
• The 1/2 inch (13 mm) diameter backsplash radius disc pad layout focuses sanding at a radius edge, which suits finishing and blending tasks on backsplashes or similar tight-radius profiles in wood or composite materials.
• The non-vacuum Dynafine configuration operates without dust extraction holes, keeping the pad face fully covered with abrasive for uniform contact when sanding small areas or detailed edges.
• The pad mounts with four screws, creating a solid mechanical connection to the Dynafine tool that supports repeatable pad changes and steady tracking during extended sanding passes.

Mounting And PSA Abrasive Interface Details

The Dynabrade non-vacuum PSA pad uses four-screw mounting, giving the pad a rigid attachment to compatible sanders so the 1/2 inch diameter radius area stays true to the tool motion during edge work. The 3/8 inch medium density urethane foam sits between the backing and the vinyl face, providing a controlled cushion that lets PSA abrasives follow slight irregularities instead of digging in, which can reduce gouging on delicate edges. The vinyl face material is designed specifically for pressure sensitive adhesive sanding discs, allowing discs to be pressed on firmly and removed when worn, supporting efficient abrasive changeovers while keeping the pad surface consistent from job to job.

Using This Radius Disc Pad In Woodworking Jobs

Where This Dynafine Radius Pad Performs Best

The 1/2 inch diameter non-vacuum Dynafine backsplash radius disc pad is suited to work where a small radius must be sanded with control, such as backsplash-style edges or narrow contours in woodworking tools and equipment setups. The medium density 3/8 inch thick urethane foam helps bridge slight variations along these profiles, so the abrasive can stay in steady contact as you guide the sander along joint lines and molded transitions. Because the pad is built around a vinyl face for PSA abrasives, it supports quick use of different grit levels on the same shaped edge, letting coarse discs handle shaping while finer PSA discs refine the finish on the identical radius track.

How Pad Construction Supports Repeatable Sanding Results

The premium self-skinning urethane foam used in this Dynabrade pad provides a uniform surface that supports the abrasive evenly, which helps deliver consistent scratch depth when running from coarse to ultra fine abrasives across the same work area. The non-vacuum design keeps the pad face uninterrupted by holes, so PSA discs cover the entire 1/2 inch diameter working area and maintain full contact on narrow edges or tight backsplash curves. Four-screw mounting ties the pad firmly to the Dynafine sander, which keeps the radius disc centered and stable, supporting predictable tool tracking and reducing the chance of the pad shifting under side load. Together, the medium density foam, vinyl face, and secure mount allow installers and shop teams to repeat edge finishing passes with similar pressure and contact, supporting consistent results across multiple parts or similar installations.

Common Questions About This Dynabrade Sanding Pad

Select This Dynabrade Pad For Radius Sanding Jobs

The Dynabrade replacement pad 58022 combines a 1/2 inch diameter backsplash radius layout, 3/8 inch medium density urethane foam, and a vinyl face for PSA abrasives, giving you a focused edge-sanding setup. The non-vacuum Dynafine design keeps the full pad face engaged with the abrasive, supporting precise work on tight contours. For woodworking operations that rely on controlled sanding along small radius edges, this pad configuration offers a straightforward way to match the tool setup to the profile demands.