Dynabrade replacement pad medium no hole gives installers and finishers a 5/8 inch diameter Dynafine backsplash radius disc pad designed for controlled sanding on profiles that match this radius. The self-skinning urethane foam construction provides both support and flexibility, so the pad backs coarse through ultra fine grit abrasives while conforming to curves without collapsing. A 3/8 inch, or 10 mm, thick medium density pad body spreads sanding pressure across the disc, which helps maintain a consistent scratch pattern along the radius. The non-vacuum design focuses air power and abrasive contact directly at the work surface, which suits detail work where dust extraction holes are not required. The Dynabrade branding and 58023 part number identify this pad as part of the Dynafine system, which supports repeat orders and consistent results across similar backsplash radius sanding tasks.
This Dynabrade 58023 replacement pad mounts with four screws, giving a secure mechanical connection between the pad and the Dynafine backing interface so the disc tracks true at sanding speed. The screw-mounted design keeps the 5/8 inch diameter pad centered, which helps maintain even pressure as the pad follows a backsplash radius. The vinyl-face PSA surface works with pressure sensitive adhesive abrasive discs sized for the 5/8 inch Dynafine radius, so the abrasive aligns with the pad edge and supports clean transitions. The medium density, 3/8 inch thick foam body sits between tool and work surface, moderating vibration while keeping the backing stable for repeatable passes along cabinet or woodworking edges shaped to that radius.
The 5/8 inch, or 16 mm, diameter Dynafine backsplash radius disc pad focuses on sanding tasks that match this specific radius, such as narrow transitions and profiled edges in woodworking or similar applications. The self-skinning urethane foam gives the pad enough resilience to ride over small surface variations while still supporting the abrasive, which benefits both shaping and final finishing steps on matching profiles. With a 3/8 inch, or 10 mm, medium density build, the pad is suited to work where a rigid backing would mark the surface and a soft backing would wash out the profile, so operators can move along the curve without flattening the detail. The non-vacuum layout leaves the full vinyl face available for PSA discs, giving full-face abrasive contact on small-radius features where every millimeter of cutting area matters. For shops using multiple grit ranges, this pad supports coarse through ultra fine PSA abrasives on the same backing, so the same radius can be taken from initial stock removal to final touch-up without changing pad geometry.
The premium vinyl face material is engineered to hold pressure sensitive adhesive abrasives securely, so discs stay fixed during use and peel away when changing grits, which reduces disc slippage that can disturb a consistent scratch pattern. The medium density urethane foam controls how much the pad deflects under pressure, helping operators feel when they are on the radius instead of rocking onto adjacent flats. By combining 3/8 inch thickness with self-skinning construction, the pad provides a tougher outer surface over a compliant core, which supports repeated passes on the same profile without the backing breaking down quickly. The four-screw mounting interface keeps the 5/8 inch Dynafine backsplash radius disc pad indexed the same way each time it is installed, supporting predictable balance and tool handling across replacement cycles. Together, these details let cabinet and woodworking shops maintain uniform edge quality on small-radius features when switching between different grits and repeated setups using the Dynabrade 58023 pad.
The Dynabrade 58023 is a 5/8 inch diameter Dynafine backsplash radius disc pad with a vinyl face and self-skinning urethane foam, used as a replacement pad for sanding radius profiles.
The Dynabrade 58023 pad is 3/8 inch, or 10 mm, thick and has medium density, giving balanced support and flexibility for sanding curves along the 5/8 inch radius.
The Dynabrade 58023 pad uses a premium vinyl face that grips pressure sensitive adhesive, or PSA, abrasives, keeping the disc secure while sanding and allowing clean removal when changing grits.
The Dynabrade 58023 replacement pad mounts with four screws, creating a secure connection to the Dynafine backing so the 5/8 inch radius disc runs true during sanding.
The Dynabrade 58023 is a non-vacuum pad, so the sanding face has no vacuum holes, providing full abrasive contact for detailed work on radius profiles.
The Dynabrade 58023 pad supports coarse through ultra fine grit PSA abrasives, allowing one 5/8 inch radius backing to handle stock removal and finishing along the same profile.
The Dynabrade 58023 replacement pad combines a 5/8 inch Dynafine backsplash radius, self-skinning urethane foam, and a vinyl-face PSA surface to support detailed sanding on matching profiles. The 3/8 inch medium density construction, non-vacuum face, and four-screw mounting give installers and woodworkers a stable, repeatable backing for coarse through ultra fine PSA discs on small-radius edges.
Sold In: 1 Each